DFI lanparty ut P35-T2R/ E8500/ 2 stage cascade

[natedog420]

wow man very nice. push it some more

[Solarfall]

Goooood my friend
Amazing v-core

lol this time around i was actually a bit worried about the vcore.. hehe i mean thats a lot for a cascade to handle and for the chip too .. the temps taken from the evaporator were constantly above -100c

wow man very nice. push it some more

i'll try

[Solarfall]

oh yeah got some pics from my run too..sorry about the overall darkness in the pics

[SF3D]

Damn.. and I did sold that chip away without testing

Well, when you break 5.8GHz with it, I will be mad

When you will do some 3D tests?

[Solarfall]

Damn.. and I did sold that chip away without testing

Well, when you break 5.8GHz with it, I will be mad

When you will do some 3D tests?

im thinking of watercooling the nb and maybe the sb too, and use chilled water of course. so 5.7gigs here i come (hopefully)
about the 3d tests i will run some when i have the time.. maybe later on next week.. dunno.. i have couple of 2900xt cards waiting

[AmdForLife]

What memory did you use and on what for settings i am looking for mem like that i am stuck on 540mhz and that aint good enough

[drizzt5]

Nice...

So i guess you like that board a lot right?

[runmc]

Awesome speeds man I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings -

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

[SoF]

haha looks like you won't sleep while you are testing pretty nice E8500 kickin' here

[Misko]

Nice scores Solarfall , the board u are using is not good for E8500, so u have potential for 615 or even 620mhz for fsb on 965 board. Did u try with only one core?

[Solarfall]

What memory did you use and on what for settings i am looking for mem like that i am stuck on 540mhz and that aint good enough

i have cellshock ddr2 pc8000 2 gb.. these stick work strangely with this board, they seem to need a lot of juice to clock well with this board

Nice...

So i guess you like that board a lot right?

hmmm yes you could say that

Awesome speeds man I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings -

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

sure i'll post them later on today, (its 5.25am and im just about to leave to work)

haha looks like you won't sleep while you are testing pretty nice E8500 kickin' here

hehe yep sleeping is overrated

Nice scores Solarfall , the board u are using is not good for E8500, so u have potential for 615 or even 620mhz for fsb on 965 board. Did u try with only one core?

im aware of this little fact, maybe i'll hunt down a 965 board.. the commando seems to be pretty good

btw i ran some prime too lol i forgot to post it lastnight..

[TheKarmakazi]

[QUOTE=Solarfall]
i used 2 sticks of ram
[QUOTE]

You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM

[EXPANDER]

Good clock. pls 3dmark2001 test

[Solarfall]

[QUOTE=TheKarmakazi;2934926][QUOTE=Solarfall]
i used 2 sticks of ram

You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM

havent heard of that one before.. hmm maybe its worth a try.. thanks for the tip

Good clock. pls 3dmark2001 test

sure thing

[Solarfall]

Awesome speeds man I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings -

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

here you go

[runmc]

thanks I will see if that helps me.

[Solarfall]

did some quick 3dmark benching today.. sorry i had time for only 01, maybe later on i will post other 3dmark scores too..