Thanks for the info

Is there no NB FID options in this BIOS?
Look around carefully for some AM2+ P-State menus.

DRAM voltage can't be accessed by any tool on this MB but for AOD, that value is just the 12V rail reading divided by around 5.5, which is how its being output [a confusion].

Quote Originally Posted by dr_drache View Post
i will try to go back in and enable EPP profiling (mistake, eather i can't find it, or it was a differnt motherboard i am thinking of) in the BIOS, after a 1.51 flash.
EPP is Intel CPU boards
With this you just have to choose the 1066 mode and set timings yourself.
you know, i feel that what i want to spend on raid, is way low, but at the same time, i have the promise chip on-board, so i don't HAVE to have one, and it's only for striped, no mirroring at all (do a self backup of everything i might want to ever keep, DVDs/Online) so, if i find one, sweet if not, blah.
Usually, onboard ATI RAID is not much different to low end PCIe RAID cards in performance. No where near vital unless the tiny perf. is critical
did the 151 flash MORE INFOS :

Version V1.5B1 04/10/2008
changes seen in BIOS : TLB FIX DISABLE - added to cell menu

Ram timings : when set all on auto and Ratio set on 1:2.66 (for my 1066)
which then i manually set to 5-5-5-15
http://i28.tinypic.com/2089qf4.jpg

no other notable changes in WINRAR or HDTACH (all changes seen were within a few %, inside a standard varation default)
Values are quite low there, you can set them manually to your rated specs of 5-5-5-15 48 tRC and 105ns tRFC both [105ns is minmum].

TLB Fix Disable was in BIOS before that too, P0J, no changes it seems.