AFAIK you need to dedicate at least 30% CPU to the GPU client in 3D Mode or it may error and/or produce low results, it'll use around 25-28% of 4-cores with stock 2.4G Q6600 or 2.5G 9850BE [tested]. My PPD for 13 hours with only a 2600XT is 986 ATM. GPU fan is 45-7% load at 64C and low CPU/RAM clocks. 96-99% GPU stream utilization though.
Better hardware and clocks should get higher. I'm still testing low end yet. After 24 hours will turn CPU/MEM clocks up to the stable settings of >3700/550 and see what it gives, then run the SMP client in combo.
Originally Posted by KTE
AFAIK you need to dedicate at least 30% CPU to the GPU client in 3D Mode or it may error and/or produce low results, it'll use around 25-28% of 4-cores with stock 2.4G Q6600 or 2.5G 9850BE [tested]. My PPD for 13 hours with only a 2600XT is 986 ATM. GPU fan is 45-7% load at 64C and low CPU/RAM clocks. 96-99% GPU stream utilization though.
Bookmarks