ASUS P5B-Deluxe; Problems & Fixes

[DOM.]

[Metro]

Well well well.

Like I have edit my post I could not install the new BIOS with asus update. I'm still on the 1226

I have changed the settings like yours only with this changes:

Memoy voltage mine are default at 1,8-1,9 so I have 1.9
Vcore I have put 1,2. It droops in full load (I have not made the mod). I was with 1.4 to have 1,36 under full load.

In the CPU settings with have you have vanderpool technology in gray mine is in blue and I have it enabled. The rest I have disabled and I will see what happens.

Edit: I that a look to the asus foruns and I'm not alone with problemns with this MB and this CPU.

[DOM.]

well I burn the file on a cd then go to ez flash 2 in the bios and thats how I update my bios and I got the bios from someone else and it worked doesnt have "Unknown CPU detected, BIOS update required to unleash its full power" anymore

and my vcore is 1.064v at load

[Metro]

well I burn the file on a cd then go to ez flash 2 in the bios and thats how I update my bios and I got the bios from someone else and it worked doesnt have "Unknown CPU detected, BIOS update required to unleash its full power" anymore

and my vcore is 1.064v at load

I was to late
I never have updated the BIOS that way. I will tray at night.
I hope it fixes my problems.

Make any difference that my board is the P5B Deluxe and not the P5B Deluxe AP/Wifi?

Can you confirm that the BIOS I have downloaded is not corrupt?

Thank you.

[DOM.]

I was to late
I never have updated the BIOS that way. I will tray at night.
I hope it fixes my problems.

Make any difference that my board is the P5B Deluxe and not the P5B Deluxe AP/Wifi?

Can you confirm that the BIOS I have downloaded is not corrupt?

Thank you.

i sent you the one I used

is this your ram cuz it shows 2.0~2.1 Volts

also this is the mem tim im running 5-5-5-15-5-35 and didnt move the others

[Metro]

i sent you the one I used

is this your ram cuz it shows 2.0~2.1 Volts

also this is the mem tim im running 5-5-5-15-5-35 and didnt move the others

I have 3 2X2GB Kits with me. That one from Gskill, one from Corsair and one from Team Group. The one I'm using right now is from Team group that have a voltage of 1,8-1,9. But you are correct about the Gskill. I have used with it 2,1V but the random crash is the same.

[DOM.]

I have 3 2X2GB Kits with me. That one from Gskill, one from Corsair and one from Team Group. The one I'm using right now is from Team group that have a voltage of 1,8-1,9. But you are correct about the Gskill. I have used with it 2,1V but the random crash is the same.

okay :P but what about the mem tim ?

have you ran the boot disc with memtest ?