@ socket
which cpus are that ?
@ socket
which cpus are that ?
Hehe...
Knut, did you bet on that Opteron 154 on ebay ?
No, why should I?Did you forget this one: http://valid.x86-secret.com/show_oc.php?id=289541 ?
![]()
Besides, I'm a bit broke atm. Bought an Opty 185 for 195 Euro, hehe. Looked quite nice, hopefully I can battle Bwanasoft with it.
...but I swear, if you break my WR with that one I'll spend every penny I have to get it backI'm not too worried, though, you really need something special to get that high clocks. I think I ran -20c when I set my WR, and I tested it on air this weekend - could get 3.2 stable with stock vcore on that friggin' boxed cooler.
Btw, the stepping of your chip is most likely CAB1E 0613CPMW.
knut, you don't know what stunned_guy and i organized for our session!!![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
Hehe...thats funny.
Opteron 154 and 156 aren´t the 2 ones...there are some things that you dont want to know
In may we will let you know![]()
1month 1day to go!!! i'm getting nervous.![]()
![]()
![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
Newcastle 3400+
Winchester 3500+
Newcastle 3800+
Toledo X2 4400+
Toledo X2 4600+
Opty 150
Opty 152
+
semprons
...are the ones that I think are most easy to break. Note that the newcastles aren't maxed out yet, same with X2 4400+ and 152.
I ASSUME that you're trying to crack my records, since you're talking like that![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
Hey Knut, I PMd you a while ago, waiting for your reply![]()
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Ok np![]()
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
phil look at my new signature![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
WOW...thats fantasticGood job gianni.
socket 940 board arrived yesterday now i need some registered ram and one cpu...
Holy smokes ....![]()
![]()
Where courage, motivation and ignorance meet, a persistent idiot awakens.
allready packed up my fastest superpi shoes for the session. we will hunt kingpin down.![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
Last edited by knopflerbruce; 04-13-2008 at 11:03 AM.
On air it does 3,27 GHz under prime95 and default vcore. The temps are around 42c so its an nice cpu. we will have much fun with it.
I need more coldness because with 1.55 volts i have -5c only![]()
Bookmarks