gmcg


Your thread will not be removed from OCZ support, we don't do that unless we see it as a non post or spam.

Second, we use Micron DDR3 for our 1600 part, pretty much the same as everyone else. I know Corsair and Gskill use the same IC's.

Now DDR3 1600 does have a jedec spec yes, Micron don't make an official DDR3 1600 part but we can speed bin 1600mhz from lower speed parts, just like Corsair, Gskill, Mushkin, and everyone else does.

I know DDr3 1600 parts are now being released, we have them in our labs for test, we will release product based around it.

Regarding boards, manufacturers have to tune the board with what they have at the time of release, with regard to DDR1600+ this will have been done with re speed binned parts from Corsair, OCZ etc, this is why you have voltage adjustment in bios

Also to hit 1600+ on the 790i you have to boot the board at 1600fsb, so Ryder was correct in what he was saying, you just took it that there was no option where we both know there is...BUT you have to work to see it.

Now as the dedicated 1600 parts become available we will move to them, boards will got thru bios updates to support them and we will all clock them to 2000+ MHZ

There is no scandal to be had here, if you want to talk techy talk to me and me only.