Quad Core OC Database

[kup]

Just got this stepping/batch

L801A876

Pack Date: 22/02/08

1.325v VID

2L75072
7A1750

Currently running @ 3GHz while installing XP @ 1.28v and did about 45mins of OCCT CPU @ 3GHz 1.28v so far...

Have any more "L801" chips been spotted out there? This one was purchased at OcUK yesterday.

[CraptacularOne]

Give them a proper run though and see what it will do. It's a new stepping that's starting to appear and there are not a lot of results with them yet. So those of you with the new steppings, start posting what you've got

[Oskaliber]

How hard is it to get Q6600 making about 3.6 <1.4V and 4.0 <1.55~? Are there often pieces like it?

[Devious]

24/7 stable 3.6 <1.4V is very common, but 4.0 <1.55 is quite rare.

[Oskaliber]

And what's max safe vcore for this CPU 24/7?

[GripS]

I wouldn't exceed 1.5v for 24/7 use.

[miahallen]

List Updated

Special thanks to miahallen for helping to compile the results And for bringing to my attention that this thread is still active

Thanks for the update Crap Glad to have you back with us, we were starting to loose faith.

[Ic3man]

Yay no#1 for watercooled 65nm quads prime95 stable (for now lol).

Cheers for the update

[wyemarn]

I just got Q6600 with a L80xxxxx, I will post the full batch number later. VID is a dissapointment. 1.325V. I think all the new 65nm quads have high VID. Currently doing 3.2 at 1.32V. I'm new to quad core overclocking so still trying to find the best stable settings.

[-Acid-]

Yay no#1 for watercooled 65nm quads prime95 stable (for now lol).

Cheers for the update

Hi W3bbo

Get that on WCG asap

never noticed this thread before lolol

all you quads get into WCG team and lets see who is really stable ????

http://www.xtremesystems.org/forums/...play.php?f=207

We dont bite !!!!!

[polar bear]

Yay no#1 for watercooled 65nm quads prime95 stable (for now lol).

Cheers for the update

Nice work there, but what's your VID? Mine's at 1.2250V and I'm prime/occt 12-hr stable at 3825 but only super-pi 32M at 4050, 1M at 4095.

Guess it's all chip-dependant (got a G0). Decent cooling too (sig). Temp limited >4.0 as chip needs dramatic Vcore increase to keep stable. Thus reaching Tjunction very quickly.

Thinking of doing as so many others and gettting a qx9650... but I've only had my q6600 since mid-jan bit early to switch lol...

[chance]

Maybe it could be better, it was a quick test...

[Richard Dower]

I think with the 9450 being 8x limited, the q6600 is still the way to go at least for my $$


Batch L737A702
3.6@2.45v
Mobo MSI P7N 780i
Air cooling
CPUZ

Where did you get CPU-Z 1.44.3?

[loonym]

hmmm... some beta site, I forget but it's really just a novelty I think since it won't even make a validation file

[Loser777]

Daaaaaamn... so far every L800+ I've seen has had a VID that sucks monkey balls followed buy crappy OCs...

Need to exchange this L804 -.-' while it's still in teh box.

[Ic3man]

Hi W3bbo

Get that on WCG asap

never noticed this thread before lolol

all you quads get into WCG team and lets see who is really stable ????

http://www.xtremesystems.org/forums/...play.php?f=207

We dont bite !!!!!

Hi m8, I don't generally go in for all this folding malarky. I just see little point in it (dons flame suit). I mean its all good and well searching for cures for diseases and respect to those who do crunch but the power it takes to run say 1,000,000 pc's at 100% load is surely gonna polute the environment and create just as many problems as it solves? Just my opinion of course.

[karl_eller]

But what's the point of having a clean environment if you're dead

Eller

[Ic3man]

The same could be said of being disease free but no planet to live on

[Ic3man]

Nice work there, but what's your VID?.

1.225v

[DRCRAWFISH]

Haven't tried it yet, but got L804A670 from Fry's online for 180 bucks.
3/31/08 pack date

[okorn]

#Batch: 740A740
Vid: 1.2000V

[Talonman]

I love this thread for the Q6600 database on page 1.

Just thought it needed a bump!

[Unoid]

add in L80x's to the database. we need to see how these new chips clock.

[Talonman]

I started working on a 3.6GHz setting, that I intend to use for just web surfing. I will save the 3.8GHz + for games only.

My lapped Q6600 GO (L726B397) with a default vcore of 1.224v's, only requires 1.392v's to make 3.6GHz stable.

Looks allot like these boy's!
Q6600 G0 - L726A854 - 3.6GHz P stable - WC D-Tek Fuzion - 1.392v - ASUS P5K Dlx - by ---------- xenolith
Q6600 G0 - L726A951 - 3.6Ghz P stable - AC TR Ultra-120 - 1.4v - ASUS P5K Dlx - by ---------------mc2k
Q6600 G0 - L727A829 - 3.6Ghz P stable - AC (not listed) - 1.4v - ASUS P5K-E - by -----------------Xevipiu
Q6600 G0 - L726A840 - 3.6Ghz P stable - WC - 1.41v - ASUS P5K Dlx - by --------------------------njkid32
Q6600 G0 - L726A850 - 3.6Ghz P stable - AC TR Ultra 120 - 1.41v - ASUS P5K Dlx - by --------------crossg

It looks like there are more A Q6600's than B's?

It did pass the OCCT mixed test for 1 hour error free, and have Primed it successfully for 4 hours. This shot is only a run of 1.5 hours, but just wanted to post a picture to keep things honest.

I only get about 42C max temp on my CPU @ 1.392 volts.

[manyga]

My Q6600 / L730B616 / VID. 1.2625 with Termalright ultra 120 Extreme in Antec P182! Q6600 and Termalright lapped!