Last edited by lefy; 04-03-2008 at 10:07 PM.
------media machine------
Q6600 L737B || EVGA 780i || 8GB G.Skill DDR2-1000 PQ || 2 x EVGA 9800 GX2
150GB Raptor (Vista x64 SP1) || 3 x 640GB WD6400AAKS RAID0
LG Blu-ray/HD-DVD Combo || Dell 3008WFP || Corsair HX1000W || Rocketfish
Air Cooled with ThermalRight Ultra 120 Extreme
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
My current q6600 needs more volts than that to be stable at 3.2GHz !!!! So that one isnt too bad .
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Got my old QX6700 ES plugged in, it is fully stable on 340 x 10 with only 1.33V...
And remember this is a B3 .
It does 4Ghz on only 1.51V .
And still I will not own everyone[/FONT]
Hello, this is my first post here and I would like to share some results and get some help. I have tried the vdroop mod in my p5e and now I got some confusing results with the vcore of the quad. Before the mod, at 9*333 the q6600 needed 1,264v and 1,224v in idle-load to get stable with prime95, and now needs only 1,200v that is the same in idle and load after the vdroop mod, so I thought the same should happens at higher speed and the quad should need less vcore but don´t.. At 8x400 before was 1,288-1,248v and now is stable with 1,264v, and at 8*425 before was 1,376-1,328v and now needs 1,352v, so the temps under load are a bit higher. Mayby someone here have a similar issue and know why this happens. Thanks in advance
Last edited by Mtrx; 04-06-2008 at 08:18 AM.
P5E; E8600; Noctua NH-U12P push-pull; Gskill 9600 2*2gb; 300gb vraptor, 2*750gb WD raid1; gtx280; Vista64x; lite-on dvd; Xilence 1000w; antec 900; hp 2475
man, my load temps at 3.6 are in the 70s. the highest is 73 on core 0 and 1.
my vcore is around 1.45v. i need to throw some more fans in the case or something
Intel Q6600 G0
DFI LANPARTY DK P35-T2RS
4gb GSkill PC8000 PQ
XFX 7800GT 256mb
320gb Seagate SATA
2x 750gb WD SATA
NEC 3550a DVD-RW
Toshiba DVD-ROM
Dell 2005fpw Ultrasharp
TT Big Typhoon + Silverstone FM121 120mm
Antec Super Lan Boy
So far for me 4GHZ = FAIL. I got up to 3960 last night at 1.5 Bios Vcore, but no go above that. Idle temps at 3960 were in high 40's. Didn't try to load yet, might have another go at it tonight.
http://valid.x86-secret.com/show_oc.php?id=341609
Last edited by lowtcell; 04-07-2008 at 06:11 AM.
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
[/QUOTE]
I wish my P5E would let me run anything other then 1:1 over 395mhz [/QUOTE]
Have you tried bios 0402? I use it and with g-skill 1006 2*2gb I was able to use 1:1, 5/6, 5/8 and ¾ with 9*333 and 8*400, 413 and 425, but I tried with 8gb and wasn´t stable for gaming so I returned them and put again my old kingston that with the q6600 and that bios is rock stable with this board instead bad temps readings sometimes and 4/5 don´t work. I use 1:1 because this ram don´t overclock much from 800mhz but got nice results for a 6400 5-5-5-15 with the Go at 8*425 using the 333strap. Here is a picture of everest (trial) that I took with the phone, I don´t know yet how to make and load here a screenshot.
P5E; E8600; Noctua NH-U12P push-pull; Gskill 9600 2*2gb; 300gb vraptor, 2*750gb WD raid1; gtx280; Vista64x; lite-on dvd; Xilence 1000w; antec 900; hp 2475
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
You hit the spot.
This is why the Q9450 stinks so much, for 45nm cpu's you can do 1.42V max for 24/7 i think, otherwise they degrade fast. Besides that, with the 45nm quads FSB wall of 440-450 in my mind, it can reach only a bare 450 x 8 or 3.6Ghz.
My Q6600 rocks , only 1.384V on 4Ghz and max suicide on that voltage is 4185Mhz, i want to see a Q9450 or Q9550 do that .
Anybody intrested to buy ?
And still I will not own everyone[/FONT]
------media machine------
Q6600 L737B || EVGA 780i || 8GB G.Skill DDR2-1000 PQ || 2 x EVGA 9800 GX2
150GB Raptor (Vista x64 SP1) || 3 x 640GB WD6400AAKS RAID0
LG Blu-ray/HD-DVD Combo || Dell 3008WFP || Corsair HX1000W || Rocketfish
Air Cooled with ThermalRight Ultra 120 Extreme
You mean 1.4v for the E8400 dont you. Here a link to a temp quide for Core duo/Quad etc. which gives all the safe limits http://www.tomshardware.co.uk/forum/...perature-guide - doesnt mean you have to follow them of course - overclocking always carries a risk -pushing the limits is all part of the fun just might cost you though
Last edited by sesdave; 04-09-2008 at 01:53 PM.
Q6600 - L729A959
VID1.2625 @3.72GHz (465x8) 1.4625v(BIOS)
P5K Premium (0702 BIOS)
Win7 Ultimate x64
Ultima-90
4x1GB Ballistix 8500C5 @ 1166 5-5-5-12 2.2v
MSI 5770 Hawk 1030/1330 - 1.25v
2 x Hitachi T7K500 320MB - Matrix RAID 0/1
Hiper Type R 680w
What upscale intel processor does a q6600 g0 at 3.0 (333x9) benchmark closest too??
Gigabyte EP45-UD3P
Intel q6600 g0 @ 3.6 VID 1.3 9x400 @1.42V
Asus 4890 TOP 950/975
G Skill- F2-8500CL5 3x1, Flex mode @ 800, 4-4-4-12
Antec TruPower New 750
Western Digital Caviar Black 1TB+
Western Digital RE2 5001ABYS + 160gig WD storage drive
Raidmax Smilodon Case
..goodbye 939..
dx58so
w3520@4100
4x1gb corsair ddr3-1333
gtx 295
TR ultra-x, 2 scythe ultrakaze push/pull
xclio stablepower 1000
vista ultimate
[SIGPIC][/SIGPIC]
-------------------------------
would you crunch if you thought it would save her life?
maybe it will!
Bookmarks