Xeon E3110 oc - Quick test

[Mykou]

Here you go Dumo. 5G 3d no prob, was limited by RAM bc I only had 4Gb kits at that time. Going for some real runs soon now that I have a few 8500 kits again.

Cy4n1d3 - Thanks for posting those screens, that is a hell of a chip, mine wont touch that low voltage at 4G.

I bet you not the only one ! but yours is nice too

[Tarowah]

About 25-28 min Prime 95 and still going.

4275MHz 1.30v

[eaa315]

E3110 - Batch# Q745A784
Using stock HSF
Haven't stressed it yet with Orthos, still trying to tweak first...but load temps have been around 47C from what I've seen.

[wadechan]

seems like i just needed to up vcore a bit more, screenshot was when i first started running ORTHOS, it's been going for ~1 hour now.

[Cy4n1d3]

As requested.. 6 hours OCCT.
Look at the voltage. Pretty good chip, need to get some 1066 ram to test further..







Guess I will be selling my X3350 next week

[Mykou]

As requested.. 6 hours OCCT.
Look at the voltage. Pretty good chip, need to get some 1066 ram to test further..


Guess I will be selling my X3350 next week

Me want your E3110

did you pencil your mobo ? nice !

[Cy4n1d3]

Hehe, ye I believe that one :P
Nope, mobo is unmodified. Tried pencil mod, but the old one didn't work and I don't have conductive ink for the new one here.

[Eldonko]

I think you should sell that to meeee.

[Cy4n1d3]

Na, I think I'll keep that one
Btw. Mykou.. what just jumps at me: you needed 4.7 ghz for <10 sec spi?
I played around a bit just before and I was below 10 secs at around 4.6 ghz.
Given the fact that my mem timings were a bit looser - like I said, it craps out >1020 mhz

[Mykou]

Na, I think I'll keep that one
Btw. Mykou.. what just jumps at me: you needed 4.7 ghz for <10 sec spi?
I played around a bit just before and I was below 10 secs at around 4.6 ghz.
Given the fact that my mem timings were a bit looser - like I said, it craps out >1020 mhz

yes sub 10 at 4.68 ghz ( see SS in my sig ) with G skill PC 6400 HZ with 5:6 ratio ( 1042 ) ; I now running cellshock 8500 but not such great difference , just more cumfortable .

don't forget it was under vista and not much tweaks.

didn't try under xp ( I'm too lazy to reinstall Oses )

I don't personnaly think there's so much loss with relaxed timings and lower mem unless you wanna bench under everest or sandra scisoft for daily apps and games ( few fps maybe )

DDR3 seems interresting to me for less vdimm needed and good perf though .

[Cy4n1d3]

Yes, I'm under Vista64 too, so I was kinda curious what took you ~100 mhz more for sub 10. Gonna buy some crucials or reaperx I guess.

[palese]

Just ordered E3110 from Newegg and it is being drop shipped from intel, I have never seen this before from intel

[dnottis]

Just ordered E3110 from Newegg and it is being drop shipped from intel, I have never seen this before from intel

Means it's gonna be tested and the worst overclocker sent. To teach us all a lesson....

[Effet]

Thanks for the pics Cy4n1d3!

[Cy4n1d3]

Thanks for the pics Cy4n1d3!

No Problem

[Tarowah]

So how do we feel about running 1.3v 24/7 with this chip? My load temps never get above 56c and thatsd after 30+ min of P95.


Everything is stable right now and my system is screaming fast but of course I dont want to kill the chip, the box says 1.25v max but I wouldnt think .5 volts over max would kill it, whats the train of thought on this?

[dnottis]

So how do we feel about running 1.3v 24/7 with this chip? My load temps never get above 56c and thatsd after 30+ min of P95.


Everything is stable right now and my system is screaming fast but of course I dont want to kill the chip, the box says 1.25v max but I wouldnt think .5 volts over max would kill it, whats the train of thought on this?

haha I wouldnt have any problem up to 1.4v to be honest. 1.3 is a walk in the park.

[billyboy]

hey, what bios are you guys running with a P5B/P5B-deluxe board? I'm using the latest beta (1226) and i can't seem to change the vcore at all. hit F10 to save and exit in the bios and it resets and just sits there.. Need a full bios clear to get the board working again! help!

[sofarfrome]

So how do we feel about running 1.3v 24/7 with this chip? My load temps never get above 56c and thatsd after 30+ min of P95.


Everything is stable right now and my system is screaming fast but of course I dont want to kill the chip, the box says 1.25v max but I wouldnt think .5 volts over max would kill it, whats the train of thought on this?

You are fine with 1.3vcore 24/7. That is an excellent chip you have. There are only 2-3 batches (either E3110 or E8400) that run that fast with that low of vcore. That chip is a keeper. Since Tankguys still has that batch available I am considering buying one to see if I get as lucky as you did. My E8400 runs 4.3GHz with 1.344vcore 24/7. It may go even lower but I haven't had time to play around much lately.

[Mykou]

You are fine with 1.3vcore 24/7. That is an excellent chip you have. There are only 2-3 batches (either E3110 or E8400) that run that fast with that low of vcore. That chip is a keeper. Since Tankguys still has that batch available I am considering buying one to see if I get as lucky as you did. My E8400 runs 4.3GHz with 1.344vcore 24/7. It may go even lower but I haven't had time to play around much lately.

If I were you, I'd already be satisfied with yours .

[Aelfgeft]

I'd like to hear some more results on this chip. I'm going to be putting together the following setup in the next few weeks:

Xeon E3110 - cooled with Thermalright Ultra-120 Extreme lapped
Gigabyte GA-P35-DS3L - NB cooled with Thermalright HR-05/IFX
2x1GB G.Skill DDR2-1000 - to avoid ram issues up to 500MHz
Stuck together in an Antec 900 with as many high performance Panaflos as I can get in there

I'd like to know what my odds are for 4.5, considering that the culprit on the DS3L usually seems to be the red-hot northbridge, and I'll be taking care of that issue.

[RealTelstar]

*subscribed*

[Cy4n1d3]

I'd like to hear some more results on this chip. I'm going to be putting together the following setup in the next few weeks:

Xeon E3110 - cooled with Thermalright Ultra-120 Extreme lapped
Gigabyte GA-P35-DS3L - NB cooled with Thermalright HR-05/IFX
2x1GB G.Skill DDR2-1000 - to avoid ram issues up to 500MHz
Stuck together in an Antec 900 with as many high performance Panaflos as I can get in there

I'd like to know what my odds are for 4.5, considering that the culprit on the DS3L usually seems to be the red-hot northbridge, and I'll be taking care of that issue.

4.5.. don't think this will be stable under 1.4V. Hell, even 1.4 won't get you stable I guess. Not even my chip does 4.5 stable at 1.4 volt I guess.

[RealTelstar]

4.5.. don't think this will be stable under 1.4V. Hell, even 1.4 won't get you stable I guess. Not even my chip does 4.5 stable at 1.4 volt I guess.

You can always try

[Cy4n1d3]

Sure. Might try tomorrow. ^^