Naked, 2x 1HP cascade

[before]

i like the packing job

I second that.

[gosmeyer]

Wow, as always very nice.

[Solarfall]

alrighty got the cascade today...works perfectly..
i must say you did awesome job packing the unit piotres it took a while to open the damn crate

here she is

[Nosfer@tu]

Now thats a pretty one

What to do if you have coldbug at lets say -90 ?

[Solarfall]

Now thats a pretty one

What to do if you have coldbug at lets say -90 ?

well im just gonna kill myself hehehehehheh

[tim-]

nossy:
you can use a coppershim

btw nice unit piotres

[Solarfall]

did some clocking with the cascade today...IT'S AWESOME.. i took a small vid for you guys..

[biglipzit]

What would be correct? The bios reading -127 or the unit reading -46? Sounds evil hehehe

[bassie]

What would be correct? The bios reading -127 or the unit reading -46? Sounds evil hehehe

-46 is first stage temp, the probe on the evap isnt connected.

[tim-]

-127 isn't true. software temperatures is not close to real temp, more correct would be somewhere in the -90*c range.

I've seen bios show from +190*c to -70isch on SS in bios.. due to the bad temp reading, especially in negative temps.

[piotres]

Nice video Solar .

Well I just want to say that I do mine job ...job which I enjoy .

I wish You awesome OC scores now .

Best Regards,
Piotres

[Solarfall]

What would be correct? The bios reading -127 or the unit reading -46? Sounds evil hehehe

-46 is first stage temp, the probe on the evap isnt connected.

-127 isn't true. software temperatures is not close to real temp, more correct would be somewhere in the -90*c range.

I've seen bios show from +190*c to -70isch on SS in bios.. due to the bad temp reading, especially in negative temps.

LOL guys of course thats not the real temp just though it was kinda funny.. obviously the dfi bios is showing the temp readings all wrong.. im guessing that the real temps would be around -100c.. dont really know for sure though since my trusty temp meter is broken..

[quintus]

so how is tha cascade going???

interested to use an tx2(r22 designed valve) with freon r404a, thats y i'm asking!

thx

[piotres]

TXV which I use there, work with R507 as good as danfoss TS2 TXV designed for 404a/507

[killermiller]

-127 isn't true. software temperatures is not close to real temp, more correct would be somewhere in the -90*c range.

I've seen bios show from +190*c to -70isch on SS in bios.. due to the bad temp reading, especially in negative temps.

I had a mobo (p5b-d?) that would show 255c if it went below -9.