Water Cooled Case Gallery

[Pedalmonkey]

clear coat will solve most any flaking issues, as will a good self etching primer or a well prepped case with a normal prime.

[boomstick68]

And I thought there were new pictures added. Silly me.

[Dark Prodigy]

This thread is continuously ruined with idle non-relevant chatter. Its a GALLERY not a chat room.

[Mankz_91]

SOOOOO quiet. Now all I have to is replace my 3 year old 160Gb with a 320Gb single platter for ultimate quiet! Specs are:

e2200 SLA8Z @ 3.4Ghz for now
2Gb 1066Mhz Dominator
DFI DK P35-T2RS
X1800 XT
Abit Airpace
Corsair 520W
Vista bussiness 32-bit

XSPC bay res/pump
XSPC 1/2" tube
Feser 1 UV Blue invisible + Aqua watery stuff
EK Supreme Plexi
EK FCX18/19
Noiseblocker XL2's @ 7v, Antec Spotcool without LED's

[dualbrain]

SPOONY: Please check your PM, because your system is outstanding!

I myself say goodbye to watercooling for 2 months:

[Waymon3X6]

I myself say goodbye to watercooling for 2 months:

Why? That rig looks great!

[seamumc]

Why? That rig looks great!

Just a guess but probably because its a pain to maintain a WC system and air cooling products have narrowed the gap.

Extreme OC'ers now use LN regularly for the top benchmarks.

[Waymon3X6]

It aint that hard... Clean the loop once every few months... no big deal.

EDIT:

It's hard to get a Q6600 to 4ghz on air anyways.

[zlojack]

Just a guess but probably because its a pain to maintain a WC system and air cooling products have narrowed the gap.

Extreme OC'ers now use LN regularly for the top benchmarks.

Narrowed the cooling gap, but not the silence gap

[taylormsj]

Ive upgraded my graphics and added it into my loop, changed fluid to some black feser, and sleeved the mobo and gpu power cables since i last posted, any comments?

Very blurry and limited pictures due to a battery shortage







And a shot of my custom front panel

[zlojack]

Looks good.

[dualbrain]

Just a guess but probably because its a pain to maintain a WC system and air cooling products have narrowed the gap.

Extreme OC'ers now use LN regularly for the top benchmarks.

Naaah - it's just because I need some of the components for a little air-cooling project. And while I use the new system ... the case is free for BIG BAD MOD-ACTION

It's that simple

And because some like it, here we go with another *sigh*

[skinnee]

dualbrain...very nice and very clean looking build!!!

[dnb#]

ey Nils,

Make some more pics m8. actually never asked for that CMMOOOONNN

sincerely your m8

[dualbrain]

Hey DNB# my friend and fellow ... I might have some left, but I don't know what was already posted. I don't want to bore.

... you know what ...

[dnb#]

that's more like it! I think I'll have to build some now... but first, I'm going to drink much....Cheers, I'm off to the pub

Have a nice weekend everyone!

[ThatGuy16]

Ive upgraded my graphics and added it into my loop, changed fluid to some black feser, and sleeved the mobo and gpu power cables since i last posted, any comments?

Very blurry and limited pictures due to a battery shortage



And a shot of my custom front panel

Looks good!

i thought this picture looked cool



I'm thinking about putting my GPU's in the loop, but that would probably generate too much heat

[Waymon3X6]

What are your cooling parts?

I have my Q6600, NB, and 2 3870s in 1 loop, the Q6600 has the Apogee GT, using standard waterblock on the Formula SE, and the 3870s have the MCW60s. Oh yeah, all cooled with a Swiftech 220 rad.

Temps are great, Quad idles around 28C, load around 40 (3.6Ghz), for 4Ghz it idles around 40C, load around 60C. GPU's are around 30C idle, 42-44C load.

[ThatGuy16]

I have the Swiftech 320 rad, and 655 pump. It would probably handle it just fine then

[Waymon3X6]

Yeah, it should... My room is usually around 18C, so just something to consider if you live somewheres hot (I live in the upper USA on the east coast.)

[imapwnu]

Hey guys,

updating my PC, added EK 680i Mosfet Blocks 1 and 2

and superclean foam, and PC Power & Cooling 1200w :-D

[Nate P.]

Wow, that looks cramped!

[MayDay84]

Hey guys,

updating my PC, added EK 680i Mosfet Blocks 1 and 2

and superclean foam, and PC Power & Cooling 1200w :-D

Hey, where are your tubes, can't see them

[Frag_Lord]

Hey guys,

Built up my watercooling into my V2000 last night











Thermochill PA120.2, D-tek Fuzion, Blitz Formula NB, MCRes, D-tek tubing, MCP655.

Sorry for poor quality pics. Only have a phone camera.

[junkun13]

that is what you call octopus tubbing