this is what i have been using for vDIMM. it scales with BIOS selected and with the actual voltage measured at a VDD pin of the DIMM slot. i generally just measure straight from the DIMM slot but with the modules in the black slots, it is impossible to get at. BTW, VDD pins in the DIMM slot report exactly what the BIOS monitor reports and is just slightly lower than selected when using the board mounting grounds as ground.
i am in the middle of a short HCI run but once it is done, i will put together a little chart.
i am also curious about Everest reporting vDIMM.
what board is that noobzed? i don't get anything but vCORE in Everest pretty much.
i will also be swapping out the stock cooling on my board this weekend so at that time i will do some of the vmod testing Dinos has posted and get some confirmation for us reference board kids
Originally Posted by 3oh6
this is what i have been using for vDIMM. it scales with BIOS selected and with the actual voltage measured at a VDD pin of the DIMM slot. i generally just measure straight from the DIMM slot but with the modules in the black slots, it is impossible to get at. BTW, VDD pins in the DIMM slot report exactly what the BIOS monitor reports and is just slightly lower than selected when using the board mounting grounds as ground.
Reply With Quote
Bookmarks