Water Cooled Case Gallery

**disruptfam** · 03-29-2008, 12:59 AM

merry xmas ICRUNK!

lmao

**K_O** · 03-29-2008, 02:02 AM

my build :
Q6600 @ 3.51GHz
eVga CK-122-NF-68-A1
4x1GB Corsair Domminator 900MHz 4-4-4-9 2T
Gainward 8800GTS 512MB 750MHz/2106MHz
Coolermaster STACKER STC-01
Corsair HX 620

Apogee GTX whit Cu top
D-Tek FuZion GFX
2x Swiftek MCW 30
Swiftek MCP655-b
2x Swiftek MCR 320QP
Silicon Tubing 14/16
DD High Flow fitings 1/2-3/4
Cape Colpex 25

**eltinio** · 03-29-2008, 02:47 AM

@ K_O looks nice your wc system but are you gonna switch that UGLY white dvd-rom station?

**K_O** · 03-29-2008, 03:12 AM

right now i haw black Pioneer DVR 215. on the photos old pioneer dvr 212

**~~emoners~~** · 03-29-2008, 04:03 AM

@K_O: nice setup! i bet that's a very quiet built since all the fans are AC.

by the way, what's the difference between the Pioneer 212 & 215?

**Pisklink** · 03-29-2008, 05:22 AM

Originally Posted by imapwnu

is that a PA? if so, very good choice on the radiator

Thanks man, it's indeed a PA120.2 mounted on a shroud and with the fans attached on the inside of the case in a push setup.

**kiparosu** · 03-29-2008, 06:11 AM

I think this is my first post on the site...

EVGA 680i sli
Q6600 4ghz - 40deg Celsius IDLE temp, 55-60 load
2gb OCZ Platinum 950 5-5-5-15
ex- 8800gtx

Rad and pump DIY, Swiftech Apogee GT block, tygon 1/2".

Waiting on video card to slap on Swiftech MCW60.

NB and SB DIY. 25deg Celsius NB, 45deg Celsius SB

Rad is 240 Heatercore from Audi with 2 Delta's pulling 100+CFM with 2" shroud

**DeViTTo** · 03-29-2008, 06:44 AM

My watercooled Rig.

kiparosu

**Arni** · 03-29-2008, 07:12 AM

Originally Posted by DeViTTo

My watercooled Rig.

kiparosu

cable menagment rox

**DeViTTo** · 03-29-2008, 08:01 AM

Originally Posted by Arni

cable menagment rox

Yea but cant do much else with the length of scsi cables, this is not a sata setup. There is 10 drives in this case also of 2 controllers I'd like to see you do better.

**ShArKo** · 03-29-2008, 08:55 AM

Originally Posted by DeViTTo

Yea but cant do much else with the length of scsi cables, this is not a sata setup. There is 10 drives in this case also of 2 controllers I'd like to see you do better.

I can do it better

ejejejej

Realy dude, take a weeken and fix that mess......Its like a hell of cables

Nice config

**[XC] NetburstXE** · 03-29-2008, 09:09 AM

That's a hell of a lot of cables. It makes my old server (don't have it anymore) look neat. I thought that my cable management was bad

. Why do you need that many HDDs?

**DeViTTo** · 03-29-2008, 09:26 AM

These are scsi cables not sata they only come in certain lengths and they cost £60 each. Obviously you dont know a lot about scsi systems. I'm wasting my time explaining to you why the cables are the way they are. It would different if it were Sata cable based but it isnt, I wouldnt swap sata for my scsi setups anyday.

**step** · 03-29-2008, 10:10 AM

These are scsi cables not sata they only come in certain lengths and they cost £60 each. Obviously you dont know a lot about scsi systems. I'm wasting my time explaining to you why the cables are the way they are.

Are you able to mount the hdd's in reverse?

I'm thinking if so - you could most probably hide majority of that behind the case and motherboard panels.

**DeViTTo** · 03-29-2008, 10:14 AM

Originally Posted by step

Are you able to mount the hdd's in reverse?

I'm thinking if so - you could most probably hide majority of that behind the case and motherboard panels.

I have looked at that, but im not to worried its cool running and I dont look at the inners too much, i'm restricted by the cable lengths and the number of headers on each cable. if I were tobuy custom scsi cables the price would rocket im sure. For that reason i'll stay with itthe way it is untill I get a Lian ki 343 later.

**DarkPulcy** · 03-30-2008, 05:00 PM

Originally Posted by adya

wow those ybris waterblocks look beautiful. are they as good or better than dtek fusion blocks? damn wish i bought those instead. theys look pretty !!!

Maybe there are... Ops so sorry, I can't tell you...

Someone wants to try???

**yngndrw** · 03-30-2008, 05:26 PM

Originally Posted by DeViTTo

These are scsi cables not sata they only come in certain lengths and they cost £60 each. Obviously you dont know a lot about scsi systems. I'm wasting my time explaining to you why the cables are the way they are. It would different if it were Sata cable based but it isnt, I wouldnt swap sata for my scsi setups anyday.

I think somebody needs to learn how to take criticism my friend. "You don't know much about X related to computers" on a computer forum is probably not the best comment to make.

Bet you get a decent boot-up time with that setup though, huh ? What difference does 15K HDDs make over 10K ?

**kolombo** · 03-31-2008, 04:07 AM

My son`s PC - ASROCK 939 DUAL SataII and my ASUS A8N32-SLI

**DeViTTo** · 03-31-2008, 04:14 AM

Originally Posted by yngndrw

I think somebody needs to learn how to take criticism my friend. "You don't know much about X related to computers" on a computer forum is probably not the best comment to make.

Bet you get a decent boot-up time with that setup though, huh ? What difference does 15K HDDs make over 10K ?

No I do its just that cables have to cross as seen in pic with scsi as the controllers are mounted on the bus rather than with sata off to the side. I would like to get a larger case at some point. I have been looking at the Lian li 343.

Anyways back to your question. I wouldnt know its fast as I want it, apart from the pauses reading the controllers in boot each time. So I am not overly concerned about boot time. I just like the responsivness of scsi as opposed to sata.

I get sustained reads of 215mb a sec, but having hardware controllers and configuring them the way I have its extremly fast in loading and saving files.
The difference over the past 10000 rpm drives I have owned is quite a gap in performance. I get 4.6ms access times and hell of lot more speed. Especially over some of the IBM DYDS drives I had.

**taylormsj** · 03-31-2008, 04:17 AM

Just clean the rest of it up and take the critisism

**kolombo** · 03-31-2008, 04:20 AM

very common , but effective

**N3it1** · 03-31-2008, 04:48 AM

kolombo mate your fan is almost as dirty and covered with dust like mine...but only almost!

**TheJollyFellow** · 03-31-2008, 05:41 AM

@kolombo: a few squirts from a can of compressed air/air compressor on that radiator will improve your temps quite a bit, the fins look to be almost completely clogged

**vitriol_drinker** · 03-31-2008, 05:57 AM

Some pics of my sys.
Pix are clickable

Laing DDC + Alphacool top
2*MCW60
Dtek Fuzion (No noozles)
DD filliport
Watercool HTF3 Tripple
Some Revoltec 50cfm fan (waiting for a Rheobus to put the 3k rpm Ultra kaze)

To cool my e6750@3.8ghz 1.45v and my 2*2900 @ 850-950 1.25v (i'll put more after)

I will need to fix properly the kinking of the hose between the 2 Gfx

**Spacehead** · 03-31-2008, 08:07 AM

older pic, have I posted this here

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

Cristian from Romania

my rig

more pic`s

Bookmarks

Bookmarks

Posting Permissions