Air Cooled Gallery

[HaGGaRd]

RIGHT GUYS!

finally finished my final mod on my Lian Li PC-60 Plus II case.

Actions taken:
- Ive made a second 80mm blow hole at the back of the motherboard tray for additional airflow.
- Removed some support bars on the side bracket for a cleaner look.
- Added rubber edging to almost everything I can edge lol.

So yeah here it is..




Fans / Window




Close up view


Behind view


Front 120mm in place and edged.

I'm really happy on how this has all turned out


Comments appreciated thankyou!

[taylormsj]

Lan

[emoners]

guys any suggestions for a PCI exhaust fan?

[HaGGaRd]

Heres my fans on test (using my current computer) to see how it looks one fan at a time:

[fungry]

Here is my setup. First time posting here
Attempting to improve the cable management but I think the lian li case is hindering my attempts



hr05 SLI/IFX w/ fan intaking the heat that is radiating from the gpu ^^

[Olivier]

Here is my setup. First time posting here
Attempting to improve the cable management but I think the lian li case is hindering my attempts



hr05 SLI/IFX w/ fan intaking the heat that is radiating from the gpu ^^

Are you sponsored by TT or ziptie?? .......only joking.......you must get interesting temps with that setup

[dnb#]

Welcome! and hf on this forums! keep your wallet as close as you can because from now you're going to spend MUCH $

[illidan]

Are you sponsored by TT or ziptie??

u meen TR

[KaOSoFt]

Wow, you guys have some pretty, and I mean, some pretty nice systems built.

Here's mine, plain and simple, but effective (in terms of noise and performance):



I replaced the included fans with two Zalman ZM-F3 (front intake and rear exhaust), and also put a Sanyo Denki San Ace 109R1212H1011 (120mm x 38mm) as the heatsink fan.

I hope it helps... any suggestions or tips for improvement would be kindly received.

[Origin_Unknown]

Are you sponsored by TT or ziptie?? .......only joking.......you must get interesting temps with that setup

thats nothing to the amount of cable ties i have in my case..

[fungry]

Haha I think I already spend too much money. It is already sad enough that I can't make use of my other TR HR05s.... because the screw that goes through the hole for the southbridge will impede the installation of the gpu. ZZZZZZZ

the setup may change in a day or two because i don't like how the SATA cables are stretched from the very bottom to the very top of the case.

As for my temperatures. When I mount the fan on the HR05 for the northbridge, it drops from 46 degrees to 39 degrees (active cooling). The CPU idles at 30 degrees (with overclock settings) and the load temperature is around 53 degrees. At stock settings (1.86ghz etc), the cpu idles at 23 degrees.

[Ar3s]

Haha I think I already spend too much money. It is already sad enough that I can't make use of my other TR HR05s.... because the screw that goes through the hole for the southbridge will impede the installation of the gpu. ZZZZZZZ

the setup may change in a day or two because i don't like how the SATA cables are stretched from the very bottom to the very top of the case.

As for my temperatures. When I mount the fan on the HR05 for the northbridge, it drops from 46 degrees to 39 degrees (active cooling). The CPU idles at 30 degrees (with overclock settings) and the load temperature is around 53 degrees. At stock settings (1.86ghz etc), the cpu idles at 23 degrees.

same thing happened to me when i wanted to add in my 2nd gpu. now the whole rig is down cause i have no idea what happened it just doesn't wanna display anything.

[fungry]

same thing happened to me when i wanted to add in my 2nd gpu. now the whole rig is down cause i have no idea what happened it just doesn't wanna display anything.

ow ><... well i got hit by bad luck. After posting the pictures up, I went on to cable manage. Upon fixing everything up... i kept getting BSOD with stop error code C0000218 (hard error). Till this very moment, I still have no clue what is the causation of the error. Initial guess was a corrupted hard drive but then again ... but i think it turned out to be the memory.

Ended up hooting a Western Digital GP 500gb and an extra tube of AS5 haha. Pictures to come soon once I am done installing all the junk onto the PC.

[Origin_Unknown]

Just got a Dominator Airflow fan.

ive just got one too and taken all the stickers of -it looks 200x better! you should take the ones off the side too

[Ar3s]

ow ><... well i got hit by bad luck. After posting the pictures up, I went on to cable manage. Upon fixing everything up... i kept getting BSOD with stop error code C0000218 (hard error). Till this very moment, I still have no clue what is the causation of the error. Initial guess was a corrupted hard drive but then again ... but i think it turned out to be the memory.

Ended up hooting a Western Digital GP 500gb and an extra tube of AS5 haha. Pictures to come soon once I am done installing all the junk onto the PC.

i'm back on stock and all those Thermalright heatsinks are in their boxes. lets see hr05 ifx sli hr05 ifx hr03gt hr03gt true hr09s hr09u baaaaaahhhh

[Obitus]

Did you buy flex force cables, or did it come with those type of cables? If you bought them, can you PM me where I can buy the flexforce cables...

The PSU comes with those cables.

Here is a pic of the final build after a got my last drive in.

[Da_maniaC]

Pc Pics 28-03-08:
(Graphics Cards Updated!)





Hardware:

Asus Maximus Formula
Intel Core2Duo E8400 @ 3,6 GHz
Zalman Fatal1ty FS-C77
OCZ ReaperX 4GB PC6400 Kit of 2 (4-4-3)
OCZ ModXstream 780 Watt
XFX Geforce 8800GTX Xtreme

2x Seagate 7200.10 320GB (in RAID 0) [Will be replaced by 2x RaptorX in RAID 0).
2x Western Digital RE2 750GB (in RAID 1)
NEC ND-4500A (Will be replaced by a Plextor PX-800 or so)
Akasa Eclipse-62
2x Aerocool Aeroturbine 3000

Samsung 913N (19"TFT, 8ms response time)
Logitech G15 keyboard
Logitech MX518 mouse (With Hyperglides)
Logitech Rumblepad II
Logitech Formula Force Feedback Wheel
Sennheiser PC140 Headset

[HaGGaRd]

Keep the pics coming ^^

[HaGGaRd]

Oh yeah I also have updated pics of my Lian Li that I will post later on this week..

[fungry]

Oh yeah I also have updated pics of my Lian Li that I will post later on this week..

looking forward to them

[dark-redeemer]

[HaGGaRd]

looking forward to them

!

[HaGGaRd]

Nice computer Dark Redeemer very clean and precise

[Darkatom]

Just got a Dominator Airflow fan.

I just bought this case today at my local Fry's. I must say this seems to be a better quality case compared to my TJ09. Overall im very pleased and excited about making the switch back to air .

[cabbspapp]

I love this case. Can't say about the TJ09, but much, much better coming out of a 900.

I'll get around to removing the side stickers.