The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[Spyrus]

According to my table you are indeed at PL = 9
with strap 333@CAS5@1:1@Disabled/Level 1
but it is strange that you have better bandwidth/latency,
i did not expect that since you are on the same strap,lower memory mhz.
PL=8 is possible there with more vmch.

[eSp!s0]

According to my table you are indeed at PL = 9
with strap 333@CAS5@1:1@Disabled/Level 1
but it is strange that you have better bandwidth/latency,
i did not expect that since you are on the same strap,lower memory mhz.
PL=8 is possible there with more vmch.

Yes, I will test on but I am at 1,39VNB and don`t want to go much higher because of passiv aircooling NB with stockcoolers from the board(non-SE).

515x7 1030ram is also ~30points better in 3DM06 but ~3000points worse in AM3 than 450x8 1080ram.
Big problem is, that 515x8 1030 Relax0 isn`t booting, but 450x8 1080Relax0 is stable!?

[Spyrus]

Yes, I will test on but I am at 1,39VNB and don`t want to go much higher because of passiv aircooling NB with stockcoolers from the board(non-SE).

515x7 1030ram is also ~30points better in 3DM06 but ~3000points worse in AM3 than 450x8 1080ram.
Big problem is, that 515x8 1030 Relax0 isn`t booting, but 450x8 1080Relax0 is stable!?

Yes because with high fsb you are overclocking mch although keeping PL the same. There are limits on this with PL+1 you can put less mch and keep pushing