Quote Originally Posted by UObean View Post
Here's the highest stable I have gotten so far:

I've taken out two sticks of ram and successfully run 2x2GB of this GSkill at 8x500 in prime for about 8 hours. With all four sticks in though, I can't get much higher than 450Mhz FSB. 460MHz has failed on all my attempts so far. Not sure if I should raise my NB or VTT voltages any higher than they already are.
I wouldn't recomend 1.42V as 24/7 clock. Will it not be stable on lower voltage? Use 1.1V on VTT, and if u can't, use 1.2V, that's enough. NB, 1.5V should be OK.