webwilli -

UPDATE: Na naší dnešní testovací desce Asus některé funkce nefungují správně a nebo vůbec. Potvrzuje se tedy má obava, že všechny funkce nového Control panelu využijete pouze na referenčních základních deskách

New Nvidia Control panel (6.10) dont work correctly with this Asus board ... it is fully working only on referrence boards (XFX, eVGA ...)

That part of article is about a FSB strap changing, on first pictures are best MEM performances ... FSB is 400MHz and mem/fsb ratio is 2:1 = mem performance is BEST ...

On next picture is second rule broken, FSB is 400, but ratio mem/fsb is higher the 2:1 = mems performance is very bad!

last picture is broken first rule, FSB is higher then 400 (and strap in NB was changed to compatible mode), but mem /fsb ratio is 2:1 ... but mems performance is also very bad ...

result: if you want the highest mem performance, you have to find best combination of strab in NB and ratio fsb/mem ... but best performance will be with fsb around 400MHz fsb ...

Asus board is great with NO undervolting, Loadline cal. works perfectly!