Trans Booster only works with the 333 and 400 settings for me. Any others and I get DET DRAM hang. I also run my NB voltage higher. 1.67v or so with water cooling.
Trans Booster only works with the 333 and 400 settings for me. Any others and I get DET DRAM hang. I also run my NB voltage higher. 1.67v or so with water cooling.
Last edited by Renegade5399; 03-15-2008 at 01:37 PM.
Intel i9 7900X @ 4.6GHz @ 1.126v
ASUS X299 TUF MARK 1
32GB G.Skill DDR4 2800
2x ZOTAC AMP EXTREME Core GTX1080Ti's in SLi
Loop 1: Apogee GTZ CPU block, MCR360 rad w/ Scythe fans, Micro-res, Aquaextreme 50Z pump
U2-UFO case
giorgos th. is using a 266 strap according to his pics... i think it varies board to board.Originally Posted by Renegade5399
Current Status - Testing & Research
Edited my post. I left out 2 very important words: "for me".
My bad.
Keep in mind I am running 4x1GB sticks of 1066 (OCZ and Crucial) at 5-5-5-15 with Perf. lvl. set to 7. I am rather impressed overall.
I just checked CPU-Z and my memory settings look strange...why do JDEC #1, JDEC #2 and EPP #1 all have different timings and voltages?...shouldn't they all be the same/matching?...or is that normal?
also in the 2nd screenshot is the FSB.DRAM supposed to be running at 5:6?
Last edited by Titus; 03-15-2008 at 01:43 PM.
ASUS P6X58D Premium/BIOS 1501 ***** MSI GTX 580 Lightning 1.5GB/280.26
Intel i7 980X (Gulftown) ***** Noctua NH-U12P SE2
G.Skill PI Series 6GB (3 X 2GB) DDR3 1600 7-8-7-24 ***** G.Skill Falcon I 256GB SSD
Lian Li PC-A70B ***** Corsair HX850W
Auzentech Auzen X-Fi Prelude 7.1 ***** Windows 7 Home Premium SP1 64-bit
what strap + PL ?
I run PL 7 - 333 Strap - NB 1.55v @ 8x458
Using 4x2GB Corsair PC8500 @ 550MHz DDR1100 - CL 5-5-3-13-2 tRFC 50
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
dont bare in mind my strap cause i work with 400fsb..
[SIGPIC][/SIGPIC]
it is normal, those are the programmed profiles in the ram. the 5:6 is normal too.I just checked CPU-Z and my memory settings look strange...why do JDEC #1, JDEC #2 and EPP #1 all have different timings and voltages?...shouldn't they all be the same/matching?...or is that normal?
also in the 2nd screenshot is the FSB.DRAM supposed to be running at 5:6?
Current Status - Testing & Research
333mhz PL7 - 1.63v 8x465
most people are posting settings for memory @ pc8500;
i wish i could attain those levels but im using pc6400.
who has good settings for ballistix 6400 ?
MB: Asus 'Maximus Rampage' (Rev 1.03g) (Stock Cooling Removed; Thermalright Replacements: HR-05 SLI/IFX, HR-09 U T2, HR-09 S T2)
CPU: Intel Q6600 'G0' w/VID: 1.2625v @ 3720MHz (465x8) Fully-Lapped to 2500 Grit. vCore @ 1.3625 (Everest) w/ vDroop Mod & MX-2
Mem: Corsair Dominator 8500 (2x1 GB) @ 5-5-5-15 DDR2-1116
PS: Corsair HX620 w/Fan Mod (Yate-Loon 'Medium', w/Added Potentiometer)
Vid: BFG GeForce 8800 GTS 512 (G92) & 8600 GT 512 (G84); BOTH Volt-Modded, Hard-Clocked, Cooler-Modded & BIOS-Tweaked
Snd: Creative Labs X-Fi Elite Pro w/ Logitech Z-5500 (Optical-In Used)
Cool: Thermalight Ultra-120-X Fully-Lapped, to 2500 Grit w/ 1x 'Scythe Ultra Kaze 2000 RPM,' overvolted
Case: Coolermaster CM-690 w/ Major Airflow Mods; Yate Loon 'Medium' 140mm's x 4 (Top, Bottom, Side); 1 Scythe Slipstream (Front); 1 Scythe Ultra Kaze 3000 RPM (Rear); Sound-Dampening Foam
Fan CTRLr: Sunbeamtech 'Rheobus Extreme' (w/Minor Superficial Mods)
HDD: 4x500GB Internal SATA Samsung's (HD501LJ)
Tmps @ Idle: GPU1: 52C; GPU2: 36C; NB: 39C; SB: 30C; CPU_1-4: '27C' <-- (1-4 Averaged)
Tmps @ Load:GPU1: 76C; GPU2: __C; NB: 44C; SB: 30C; CPU_1-4: '50C' <-- (1-4 Averaged)
My RIG: #1 , #2 , #3
Flashed back to 0214 and now i finally can boot at 450x9,5 again. Found a solution also for my auto vcore, reset bios to default and change vcore from auto to like 1.125 and rebooted. Now i can boot with any vcore i will. Simple problem but hard to find sometimes
Running at PL7 right now ......
[SIGPIC]http://techsweden.org[/SIGPIC]
Gigabyte Z87X-OC, Haswell 4770K, 8GB Team Group 2666mhz, Asus HD7970
Has ne1 bothered with the comparison that Zucker2k was asking for yet?
If not I will try it after a fresh beverage
i could probably swap in some ocz 6400's from my gf's computer to test and have a go at those settings...
Current Status - Testing & Research
nah man thats too much trouble for you; i was just hoping someone around these parts had the same ram as me...
i think i need to get some ballistix 8500's
MB: Asus 'Maximus Rampage' (Rev 1.03g) (Stock Cooling Removed; Thermalright Replacements: HR-05 SLI/IFX, HR-09 U T2, HR-09 S T2)
CPU: Intel Q6600 'G0' w/VID: 1.2625v @ 3720MHz (465x8) Fully-Lapped to 2500 Grit. vCore @ 1.3625 (Everest) w/ vDroop Mod & MX-2
Mem: Corsair Dominator 8500 (2x1 GB) @ 5-5-5-15 DDR2-1116
PS: Corsair HX620 w/Fan Mod (Yate-Loon 'Medium', w/Added Potentiometer)
Vid: BFG GeForce 8800 GTS 512 (G92) & 8600 GT 512 (G84); BOTH Volt-Modded, Hard-Clocked, Cooler-Modded & BIOS-Tweaked
Snd: Creative Labs X-Fi Elite Pro w/ Logitech Z-5500 (Optical-In Used)
Cool: Thermalight Ultra-120-X Fully-Lapped, to 2500 Grit w/ 1x 'Scythe Ultra Kaze 2000 RPM,' overvolted
Case: Coolermaster CM-690 w/ Major Airflow Mods; Yate Loon 'Medium' 140mm's x 4 (Top, Bottom, Side); 1 Scythe Slipstream (Front); 1 Scythe Ultra Kaze 3000 RPM (Rear); Sound-Dampening Foam
Fan CTRLr: Sunbeamtech 'Rheobus Extreme' (w/Minor Superficial Mods)
HDD: 4x500GB Internal SATA Samsung's (HD501LJ)
Tmps @ Idle: GPU1: 52C; GPU2: 36C; NB: 39C; SB: 30C; CPU_1-4: '27C' <-- (1-4 Averaged)
Tmps @ Load:GPU1: 76C; GPU2: __C; NB: 44C; SB: 30C; CPU_1-4: '50C' <-- (1-4 Averaged)
My RIG: #1 , #2 , #3
Flashed 0219 from 1004
E6750 - CRUCIAL BALLISTAX 8500
I have a set of patriot 9600's that I will try out next, they were quite stable with the formula bios.
E6750 @ 3.4GHZ (425FSB) @ 1.44V - Asus Rampage Formula (conversion) Bios 0403 - 2X2GB Corsair Dominator (CM2X2048-8500C5D) @ 566mhz @ PL 6 2.18V 5-5-5-18 - EVGA 8800GTS 640MB SSC - 1X WD RAPTOR 150 - 1X WD RAPTOR 74GB - LOGITECH Z5500S - ACER P221W
so what is my actual memory voltage, 2.1v or 1.8v?...in PC Probe my DRAM voltage shows as 1.98v but CPU-Z shows 2 other voltages
ASUS P6X58D Premium/BIOS 1501 ***** MSI GTX 580 Lightning 1.5GB/280.26
Intel i7 980X (Gulftown) ***** Noctua NH-U12P SE2
G.Skill PI Series 6GB (3 X 2GB) DDR3 1600 7-8-7-24 ***** G.Skill Falcon I 256GB SSD
Lian Li PC-A70B ***** Corsair HX850W
Auzentech Auzen X-Fi Prelude 7.1 ***** Windows 7 Home Premium SP1 64-bit
im actually going to pick up some ballistix 8500's in a hour or sonah man thats too much trouble for you; i was just hoping someone around these parts had the same ram as me...
i think i need to get some ballistix 8500's
Current Status - Testing & Research
cpu-z is showing "suggested" timings at those voltages, it is not what is actually set. pcprobe is not what i would call "accurate" but 1.98v is what your ram is at.
Current Status - Testing & Research
25mhz more on the fsb and the mobo is skyrocketed....
i wish i had an 8500 to test higher...
[SIGPIC][/SIGPIC]
grab me a few?im actually going to pick up some ballistix 8500's in a hour or so
here are my updated numbers...making good progress here.
Last edited by ericab; 03-15-2008 at 02:57 PM.
MB: Asus 'Maximus Rampage' (Rev 1.03g) (Stock Cooling Removed; Thermalright Replacements: HR-05 SLI/IFX, HR-09 U T2, HR-09 S T2)
CPU: Intel Q6600 'G0' w/VID: 1.2625v @ 3720MHz (465x8) Fully-Lapped to 2500 Grit. vCore @ 1.3625 (Everest) w/ vDroop Mod & MX-2
Mem: Corsair Dominator 8500 (2x1 GB) @ 5-5-5-15 DDR2-1116
PS: Corsair HX620 w/Fan Mod (Yate-Loon 'Medium', w/Added Potentiometer)
Vid: BFG GeForce 8800 GTS 512 (G92) & 8600 GT 512 (G84); BOTH Volt-Modded, Hard-Clocked, Cooler-Modded & BIOS-Tweaked
Snd: Creative Labs X-Fi Elite Pro w/ Logitech Z-5500 (Optical-In Used)
Cool: Thermalight Ultra-120-X Fully-Lapped, to 2500 Grit w/ 1x 'Scythe Ultra Kaze 2000 RPM,' overvolted
Case: Coolermaster CM-690 w/ Major Airflow Mods; Yate Loon 'Medium' 140mm's x 4 (Top, Bottom, Side); 1 Scythe Slipstream (Front); 1 Scythe Ultra Kaze 3000 RPM (Rear); Sound-Dampening Foam
Fan CTRLr: Sunbeamtech 'Rheobus Extreme' (w/Minor Superficial Mods)
HDD: 4x500GB Internal SATA Samsung's (HD501LJ)
Tmps @ Idle: GPU1: 52C; GPU2: 36C; NB: 39C; SB: 30C; CPU_1-4: '27C' <-- (1-4 Averaged)
Tmps @ Load:GPU1: 76C; GPU2: __C; NB: 44C; SB: 30C; CPU_1-4: '50C' <-- (1-4 Averaged)
My RIG: #1 , #2 , #3
thanks for your time
man, I can't believe. I've got 3.4ghz! in 10 seconds!
I was thinking that was needed to set all that strange parameters to get anything, like all of you listed in yours settings.
But so I "pretended" it was an ABIT, and made simple:
set FSB to 378x9
FSB STrap 400mhz
Vcore 1.375
all the rest on AUTO!
my BIOS is 505
just it! It's holding fine! got 5150 CPU score on 3dmark06,
and the temps are below 35ºC Idle
just can't raise the memos, but it was a nice start!
Raidmax ATOMIC - Core i7 3770s + Corsair H70 // Gigabyte H77N WIFI // Corsair Vengeance 2x4GB 2133mhz // EVGA GTX1060 ACX2.0// Kingston SUV400 480Gb // Sharkoon SFX500L
thanks for the knowledge
ASUS P6X58D Premium/BIOS 1501 ***** MSI GTX 580 Lightning 1.5GB/280.26
Intel i7 980X (Gulftown) ***** Noctua NH-U12P SE2
G.Skill PI Series 6GB (3 X 2GB) DDR3 1600 7-8-7-24 ***** G.Skill Falcon I 256GB SSD
Lian Li PC-A70B ***** Corsair HX850W
Auzentech Auzen X-Fi Prelude 7.1 ***** Windows 7 Home Premium SP1 64-bit
Does anyone know what the curing time is for a "fresh application" of artic silver 5
By curing time, i mean when does artic silver show its benefits
Kevin
@ giorgos th. , whats your max fsb you've managed to attain with your processor?
i cant get anything semi stable over 430 and 440 is so unstable its not funny and thats with 266 strap and its just raping my ram for MHz, no other straps will work over 430ish for me
this pic was with MF Bios, but have flashed to RF 219 nw, but still nothing very stable over 430. anybody got any ideas, i thought 450fsbQC was supposed to be a piece of cake with this board!!?
we need more settings than what your screenshots show to see what you can do to get more performance@ giorgos th. , whats your max fsb you've managed to attain with your processor?
i cant get anything semi stable over 430 and 440 is so unstable its not funny and thats with 266 strap and its just raping my ram for MHz, no other straps will work over 430ish for me
this pic was with MF Bios, but have flashed to RF 219 nw, but still nothing very stable over 430. anybody got any ideas, i thought 450fsbQC was supposed to be a piece of cake with this board!!?
Current Status - Testing & Research
i believe its 60 to 70 hours of computer usage time
MB: Asus 'Maximus Rampage' (Rev 1.03g) (Stock Cooling Removed; Thermalright Replacements: HR-05 SLI/IFX, HR-09 U T2, HR-09 S T2)
CPU: Intel Q6600 'G0' w/VID: 1.2625v @ 3720MHz (465x8) Fully-Lapped to 2500 Grit. vCore @ 1.3625 (Everest) w/ vDroop Mod & MX-2
Mem: Corsair Dominator 8500 (2x1 GB) @ 5-5-5-15 DDR2-1116
PS: Corsair HX620 w/Fan Mod (Yate-Loon 'Medium', w/Added Potentiometer)
Vid: BFG GeForce 8800 GTS 512 (G92) & 8600 GT 512 (G84); BOTH Volt-Modded, Hard-Clocked, Cooler-Modded & BIOS-Tweaked
Snd: Creative Labs X-Fi Elite Pro w/ Logitech Z-5500 (Optical-In Used)
Cool: Thermalight Ultra-120-X Fully-Lapped, to 2500 Grit w/ 1x 'Scythe Ultra Kaze 2000 RPM,' overvolted
Case: Coolermaster CM-690 w/ Major Airflow Mods; Yate Loon 'Medium' 140mm's x 4 (Top, Bottom, Side); 1 Scythe Slipstream (Front); 1 Scythe Ultra Kaze 3000 RPM (Rear); Sound-Dampening Foam
Fan CTRLr: Sunbeamtech 'Rheobus Extreme' (w/Minor Superficial Mods)
HDD: 4x500GB Internal SATA Samsung's (HD501LJ)
Tmps @ Idle: GPU1: 52C; GPU2: 36C; NB: 39C; SB: 30C; CPU_1-4: '27C' <-- (1-4 Averaged)
Tmps @ Load:GPU1: 76C; GPU2: __C; NB: 44C; SB: 30C; CPU_1-4: '50C' <-- (1-4 Averaged)
My RIG: #1 , #2 , #3
Posting Permissions
Reply With Quote
Bookmarks