thks clokker ! eye hopeing to hold out for next stepping but it's getten harder & harder to wait hahahaha those 743's & 746's are what eye have to choose from at my wholesaler TPI Inc. here in phx.
thks clokker ! eye hopeing to hold out for next stepping but it's getten harder & harder to wait hahahaha those 743's & 746's are what eye have to choose from at my wholesaler TPI Inc. here in phx.
[SIGPIC][/SIGPIC]
PENT E8400 batch #814A014 ...4.3 at 1.34v~4.7 at 1.45v
FOXCONN MARS
COOLIT Eliminator 7*c idle~27~38*c load $95bucks !
BUFFALO FireStix's ddr2-800 do 1200 eazy at 2.1v
OCZ 2x2 kit pc2 8500 - 1066 @1069 atm
Quattro 1000W
Radeon 2-4850's in crossfire
OCZ Vertex SSD thanks Tony!
ALL PIPED INTO HOUSE AIRCOND ;}
*QUANTUM FORCE* saaya & sham rocks !
*REAL TEMP*
At least you've got some Xtreme software now for working in Xtreme situations! "Unclewebb" rocks !
*MEMSET* Felix rocks !
*SUPER TEC MAN* UncleJimbo rocks !
OVERCLOCKERS MAG..http://www.xtremesystems.org/forums/...d.php?t=197660
If I was u I would go for one of those Q743A's at your local retailer.Originally Posted by HDCHOPPER
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
I was able to SPi @ 4.25GHz 1M - 10.656s 32M - 12:31 and some change
However, I got greedy with memset and tried to drop timings too far (or simply did something I shouldn't have) and have either
a) already borked my RAM
b) pushed the chip too far
c) need to reload Windows @ stock settings
I'm thinking I'll try c first before I go out and buy new RAM or a proc.
I have the same exact thing. I do 445x9 4.005ghz at 1.24 vcore in cpu-z under load. I have to set to 1.31 in bios but I got a pretty bad vdroop.
4ghz @ 1.248v on load
Q745A567
Last edited by ThatGuy16; 03-14-2008 at 08:29 PM.
[SIGPIC][/SIGPIC]
3DMark06: 20974
what priority should be set to orthos for priming ?
saw people priming at priority 1 when some set it at level 7
E8400@3.6ghz 1.11v |Asus P5E3 deluxe bios 1001| 2 giga Cellshock DDR3 12800@1696mhz|Samsung Syncmaster 2232BW 22' | Asus 8800 GTS² 512 TOP|Western digital sata 500 SE16 | Blu Ray LG GGW-H20LRB| Creative X-fi platinum|Nexus 600W | case Coolermaster 1000 "Storm"
Xeon E3110@3.6ghz 1.15v|Asus P5K premium "blackpearl" bios 503|2 gigas Cellshock DDR2 8500 |Twintech 9600 GT|nec 1970 GX|Gigabyte 3D aurora case
E8400(Q804A249) valid@ 4.8 ghz 1.56v
Xeon E3110 (Q746A534)valid@ 4.79 ghz 1.59v real bios AIR /superpi 1m@9.968 .. under vista
My Ibanez 540S " Saber "overclocked with Di Marzio and Sperzel
My cousin on drums Hi Brian !
Setting a higher priority will supposedly keep a more consistent load. It sets the priority of orthos vs. other applications running in windows. I've never noticed a difference in results. Meaning in my case if it fails at 9 it fails at 1.
Hi all, very impressive overclocks... I just installed my E3110 today. I seen a few posts that do not make any sense to me.... I only ever adjust the cpu fsb... so 8 x 500 would be 4000mhz.... but I seen someone in this thread, running that but getting 4500mhz....
is there some other setting I can alter, to maybe get a better overclock....
my 9 x 480 failed and rebooted my computer, but 9x478 is still running right now.... but I am using high voltage (1.6)....
once I know if it is stable... I will play around, but if I am missing out on something, plz let me knowwwwwwwwwwww
thx
Biostar Tpower X58
lian v1200
Intel Core i7 920 4200mhz, posted at 4350
Aeneon Xtune 3X1GB DDR3-1600
4870X2
raptor x 150s in raid 0
Corsair TX850W
2 x hitachi 1000 gig
TT Extreme 120
facebook chips msg for details
You were probably looking at ORTHOS...don't.
It apparently can't recognize when the multiplier has been changed and just defaults to applying a 9 multi to whatever the FSB (which it CAN read correctly) is.
Believe the CPUID screens instead.
"Let's face it, we're not changing the world. We're building a product that helps people buy more crap - and watch :banana::banana::banana::banana:." - Bill Watkins- CEO Seagate Technology
ahhh, thx!
Biostar Tpower X58
lian v1200
Intel Core i7 920 4200mhz, posted at 4350
Aeneon Xtune 3X1GB DDR3-1600
4870X2
raptor x 150s in raid 0
Corsair TX850W
2 x hitachi 1000 gig
TT Extreme 120
facebook chips msg for details
I got mine stable at 445x9.0 (1780QDR -- 4.01GHz) at 1.425v Vcore (1.39idle in windows and 1.36v under load) Runs great, I got a below average batch (Q76A366).. needs a crap load of VCORE to go up from 3.83, which i had running at 1.3 underload..
Last edited by Furiøùs; 03-15-2008 at 06:22 AM.
Asus Rampage II Extreme
Intel i7-920 @ 4.2Ghz w/ HT
6GB G.Skill @ 1600Mhz
eVGA / MSI GTX480 SLI
Corsair HX1000w
CoolerMaster HAF932 OG
Corsair H70
hallo can somebody tel me where can i find this?..
stepping 6C0
week Q746
code A518
?..thanks i m amateur
If you buy retail, the "week" and "code" are both on the line:
FPO/Batch #: [Week & Code]
So for that example it would read:
FPO/Batch #: Q746A518
I believe all e8400's are C0 stepping at this point.
>> i5 750 @ 3.6Ghz | CM212Plus + P12 | P55-UD3R [BIOS F2] | 4GB G.Skill CL8 | Zotac GTX 580
.: 4 x 1TB WD | Corsair TX750 | Lian Li PC-A70A | X-Fi | Logitech Z-2300
I have to check my..
your E8400 has got good voltage in high oc..
cause i ve got all my HW in boxes and still waiting on my case..
i can t wait....so should be write on his of processor yes?..
I'm at 450x9, memory unlinked and prime stable with 1.375 vcore. Where are you all getting these batch numbers? I thought that 1.375 was pretty good for 4.05ghz.
EVGA 780i--E8400 @4.05Ghz--TRUE--EVGA GTX760 4GB--4X2GB PC6400 REAPER 4-4-4-15-2T @800mhz--150 RaptorX--PCPC 750 silencer--Antec 900
Here is my Xeon 3310 I`m heppy for now
ASUS P5B Dlx; 2 x 1024 MB Crucial Tracer
Xeon 3110@4000 MHz 1.296V Seasonic 600W,
8800 GT
here's my best on chilled water
I finally installed my e8400 this week.
Not stable at 4ghz with 1.425
Will barely boot windows with 1.4v.
Meh.
running the same at 1.5 right now, I will keep lowering the volts until I crashes
heh
Biostar Tpower X58
lian v1200
Intel Core i7 920 4200mhz, posted at 4350
Aeneon Xtune 3X1GB DDR3-1600
4870X2
raptor x 150s in raid 0
Corsair TX850W
2 x hitachi 1000 gig
TT Extreme 120
facebook chips msg for details
Lap it. Mine needed 1.425 @ 4.0 Ghz. Now I'm running 4.1Ghz @ 1.39v orthos stable. Prolly shaped like a spoon.I finally installed my e8400 this week.
Not stable at 4ghz with 1.425
Will barely boot windows with 1.4v.
Meh.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Here are my results with LN2. I should have an E8500 coming very soon too.
very nice i wish I could do dome ln2 benching
Finally !!
sub 10 '
Xeon E3110 4.7 ghz @1.56v real bios
just forgot to validate lol
just 4.6 ghz
AIR COOLING
9,968 sec under vista 32 bits
regards
E8400@3.6ghz 1.11v |Asus P5E3 deluxe bios 1001| 2 giga Cellshock DDR3 12800@1696mhz|Samsung Syncmaster 2232BW 22' | Asus 8800 GTS² 512 TOP|Western digital sata 500 SE16 | Blu Ray LG GGW-H20LRB| Creative X-fi platinum|Nexus 600W | case Coolermaster 1000 "Storm"
Xeon E3110@3.6ghz 1.15v|Asus P5K premium "blackpearl" bios 503|2 gigas Cellshock DDR2 8500 |Twintech 9600 GT|nec 1970 GX|Gigabyte 3D aurora case
E8400(Q804A249) valid@ 4.8 ghz 1.56v
Xeon E3110 (Q746A534)valid@ 4.79 ghz 1.59v real bios AIR /superpi 1m@9.968 .. under vista
My Ibanez 540S " Saber "overclocked with Di Marzio and Sperzel
My cousin on drums Hi Brian !
nice
CN
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
Quick test on a chip I just received back from Intel RMA.
Q740A479T
i7 3770k - p8z77-v pro - 4x4gb - gtx680 - vertex 4 256gb - ax750
i5 3570k - z77-pro3 - 2x4gb - arc-1231ml - 12x2tb wdgp r6 - cx400
heatware
Posting Permissions
Reply With Quote
Bookmarks