Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

**zsamz_** · 03-12-2008, 03:08 PM

Originally Posted by zanzabar

dose any1 still sell the bios blocks i think that i need to get a spare if im going to go over 500 fsb since ive already had to reflash my bios

and how do u tell what delays to use im not getting how this works and zamz recommendations wouldent post, but i did get this at 1ghz c4, the c4 is better for general use from what ive been doing so im sticking with that for now

i go that better with the fine delay, but i need to up the read

yes zanzabar you better with cas 4 like me

go 505 or 510 fsb its much better

zanzabar i'd sell ya one of my chips for 10$ but you in the us
but the guy i bought it from is in cali verry close to you
he goes by biosdepot on ebay been dealin with him 5 years now
good service n gives 90day warranty too n real cheap

**zanzabar** · 03-12-2008, 03:09 PM

so do i just need any 8MB block or is there a specific one

and i saw other boards getting to 1ghz c4 with performance lvl 7 is there any chance that i can get that has any1 gotten that on the dfi

**zsamz_** · 03-12-2008, 03:32 PM

Originally Posted by zanzabar

so do i just need any 8MB block or is there a specific one

and i saw other boards getting to 1ghz c4 with performance lvl 7 is there any chance that i can get that has any1 gotten that on the dfi

just the brand gotta be the same i think
on my spare chip
# are
49lf008A
33-4C-NH
0527328-B

just hot flash 1 n see
thats what i did after i flashed dk bios

into the lt

to be honest my spare chip works better than my original chip
i cant wait to flash the x48 bios in

**Jor3lBR** · 03-12-2008, 05:47 PM

Originally Posted by NeoGeo333

to all looking to watercool the chipset dangerden is coming with a special block designed just for the p-35 and x-38. I saw it from hardocp forum a person working from DD said so. let just hope it covers all of it and released soon.

Humm not that this make any difference but does the Swifech MCW30 cover the hole surface of the x38 chipset?

Well anything that covers at least 50% will do better then the original DFI NB cooler I could barely cover 35% using any type of installation, I probably got a defective peace.. .

I'm moving on to water on NB's too...

**zanzabar** · 03-12-2008, 05:58 PM

the chip is 10% larger than the p35 it just has an ihs on it so it dont have to cover the whole thing just the middle

**Jor3lBR** · 03-12-2008, 08:40 PM

See what I mean:

Probably they made the X48 chipset flatter :-)

**rioja** · 03-12-2008, 09:25 PM

Hm, for cooling NB Ive found that my previous EK Asus 1 block covers NB just ideally. Only problem is that mounting holes don't much, so I make mounting plate for it (similar as D-Tek Fuzion).
And for SB I'll use Enzo CNB S1-L, fully passive without fun.
Thx to all for advices.

**NeoGeo333** · 03-13-2008, 04:58 AM

Originally Posted by Jor3lBR

Humm not that this make any difference but does the Swifech MCW30 cover the hole surface of the x38 chipset?

Well anything that covers at least 50% will do better then the original DFI NB cooler I could barely cover 35% using any type of installation, I probably got a defective peace.. .

I'm moving on to water on NB's too...

Got the board yesterday, i have a mcw30 somewhere will see if it fit nicely, but will definately get the new dd or if ek pull something out really quick.

**2000army** · 03-13-2008, 05:06 AM

Originally Posted by NeoGeo333

Got the board yesterday, i have a mcw30 somewhere will see if it fit nicely, but will definately get the new dd or if ek pull something out really quick.

MCW30 fits perfectly.

**t_ski** · 03-13-2008, 10:50 AM

Originally Posted by NeoGeo333

to all looking to watercool the chipset dangerden is coming with a special block designed just for the p-35 and x-38. I saw it from hardocp forum a person working from DD said so. let just hope it covers all of it and released soon.

That sounds very nice. Can you post a link to the thread over at [H]?

**Brother Esau** · 03-13-2008, 10:59 AM

Originally Posted by kberguy1

I have both the Enzotech SNBW-SLI NB waterblock and the Enzotech SLF-1 SB heatsink and Fan, and they both work great! My temps for NB at 3890 MHz under Prime 95 are only 39 C. The Enzo NB doesn't quite cover everything, but it covers the main 90%, and I sure can't complain about temperatures

kberguy1.........Hey Ken you have PM

**Den Leiw** · 03-13-2008, 11:08 AM

anyone tested TR 05 SLI or non-SLI on the NB? Is it even possible?

**rioja** · 03-13-2008, 11:15 AM

I have spent several hours making custom plate for NB from peace of aluminium, and now I have EK Asus block sitting perfectly and covering 100% heatsink (have to polish it though, to get look like D-Tek plate)

But let me annoy u and ask last time about SB

Will be Enzo block CNB S1L (without fan) enough for SB cooling? Or should I get MCW-30?
I just dont want to use a fan, or huge heatsink like Thermalright 05 becoz of some austethic reasons.
So ENZO CNB or waterblock?

Thx again

**NeoGeo333** · 03-13-2008, 12:07 PM

Wow, i have that same block for my striker extreme. I wish i have the time to make something like that. or why dont ek make a adapter so it will fit. nice job rioja can you post temp of it?

**NeoGeo333** · 03-13-2008, 12:21 PM

the link for the DD block for NB is
http://www.hardforum.com/showthread.php?p=1032168155

**rioja** · 03-13-2008, 12:54 PM

Originally Posted by NeoGeo333

or why dont ek make a adapter so it will fit.

oh yeah, this is question i thought many times about. those plate costs just cents, and could be made in less than hour even without automatic instruments.
but capitalists, they force us pay more, buy more

**EnJoY** · 03-13-2008, 01:34 PM

Is the audio driver on DFI's website the only one that can be used, or can you just use the Realtek HD Audio codec? I only ask because Realtek updates their driver much more frequently.

Also, what's the latest beta bios for the LT X38 and where could I find it?

**zsamz_** · 03-13-2008, 01:55 PM

Originally Posted by Den Leiw

anyone tested TR 05 SLI or non-SLI on the NB? Is it even possible?

i just bought 2 tr-05s gonna slap em on next week

**zsamz_** · 03-13-2008, 01:57 PM

Originally Posted by EnJoY

Is the audio driver on DFI's website the only one that can be used, or can you just use the Realtek HD Audio codec? I only ask because Realtek updates their driver much more frequently.

Also, what's the latest beta bios for the LT X38 and where could I find it?

i think you should be able to use RL HD
the beta is older
this latest
http://us.dfi.com.tw/Support/Downloa...FLAG=A&SITE=US

**EnJoY** · 03-13-2008, 02:47 PM

Originally Posted by zsamz_

i think you should be able to use RL HD
the beta is older
this latest
http://us.dfi.com.tw/Support/Downloa...FLAG=A&SITE=US

So, Oskar really hasn't released anything for the board since? What happened to the days of tons of beta bios releases?

**zsamz_** · 03-13-2008, 03:12 PM

Originally Posted by EnJoY

So, Oskar really hasn't released anything for the board since? What happened to the days of tons of beta bios releases?

really pitifull i was honestly expecting @ least 1 every 2 weeks
i was bashin gigabut for crappy x-38 bios but @ least they were releasing them
performance was better on gigabut x38

makin me wish i had a maximus

@ least i coulda turned her into a rampage
just wish i had my hands on x48 bios

**PhilDoc** · 03-13-2008, 03:35 PM

Originally Posted by zsamz_

really pitifull i was honestly expecting @ least 1 every 2 weeks
i was bashin gigabut for crappy x-38 bios but @ least they were releasing them
performance was better on gigabut x38

makin me wish i had a maximus

@ least i coulda turned her into a rampage
just wish i had my hands on x48 bios

I think mbpro start shipping them tomorrow, so it should be long. I'm not sure the bios will offer more than the X38, but we'll see soon.

**NeoGeo333** · 03-13-2008, 04:24 PM

I doubt the x-48 will be that much better than the x-38 at least the ddr2 version. I mean its basically the same chip right? Now with ddr3 thats another thing.

**NeoGeo333** · 03-13-2008, 04:26 PM

Originally Posted by rioja

oh yeah, this is question i thought many times about. those plate costs just cents, and could be made in less than hour even without automatic instruments.
but capitalists, they force us pay more, buy more

Hey rioja maybe you can make some more and sell them, at least i will buy one hehehe.

**kberguy1** · 03-13-2008, 10:34 PM

Someone here had posted about using a backing plate when mounting a waterblock for CPU. I took things apart today, and added the backplate I got with my Thermalright Ultra 120 Extreme HS.

With new thermal paste with no "cure time", my temps have still dropped by 5 C. In addition, the temp variance between cores has been reduced by 2-3 C.

I am working on setting things up for "everyday" use right now. my system is running Prime 95 @3600 MHz (9 x 400 MHz FSB) with only 1.2750 vCore in BIOS. Smart Guardian is reporting it as 1.29 CPU.

It used to take 1.2825 vCore to do the same thing with my old DFI Lanparty UT P35-T2R, so I am pretty happy about that

So for whoever posted the backing plate idea (was it you C-N?), I thank you

Thread: Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

Thread Tools

Search Thread

Rate This Thread

Display

NB waterblock MCW30vs Enzo

DFI Original Cooler Spring/HardMounted

Removed my MB to add backplate, and temps have dropped avg 5 C

Bookmarks

Bookmarks

Posting Permissions