Air Cooled Gallery

[IKIKUINTHENUTZ]

@IKIKUINTHENUTZ

what are the temps like for 2 passive HR-03 GT in crossfire ?

Oh man some people are refering my bottom card as the top and top as bottom but some consider my picture backwards while some knows it's the case that makes it inverted. Ill just refer to my "bottom card" with the HR-03 GT, HR-09 and HR-11 as #1 and the other one with only the HR-03 R600 but right next to 2 exaust sharkloon fans (it's not a HR-03 GT ) as #2

More pics
http://www.xtremesystems.org/forums/...postcount=2501

Both cards in Crossfire, results recorded using ATi Catalyst in OverdriveTM sub menu, MX-2 were used as the TIM during the mounting of the aftermarket HR-03 coolers

Both card's clock speeds are
Core: 800
mem: 1170

Ambient 22c
Idel
#1: 43c
#2: 36c

Load
Results Recorded during the 30 mins of crysis game play by average
#1: 71
#2: 51

Im trying to replace the side panel for one with side exaust to furthur reduce tempatures

[Ar3s]

Thanks. 71 on passive isn't that bad. I can't tell thermalright 6 heatpipe gpu coolers apart my bad.

[IKIKUINTHENUTZ]

Thanks. 71 on passive isn't that bad. I can't tell thermalright 6 heatpipe gpu coolers apart my bad.

rofl no one can, the base and accesories are different which are never showned or told in pictures

they are the same thing basically when the mounting system is identical

just different ram sinks

The HR-03 R600 cut out base can fit over the G92 and 3870 dies just fine. I got it because it was only 22$ at coolerguys in a one day sale, I didnt want to pay another $50

[Demo]

so why are you giving more cooling on the other card ?

[IKIKUINTHENUTZ]

so why are you giving more cooling on the other card ?

because it's no where near any fans in the case thus passive. On the other card which is next to 2 fans, you will see a HR-05 sli blocks the vregs preventing a 2nd HR-09 and there is no way I can fit a 2nd HR-11 due to space constrants.

[BuBBle.D]

Here are some crappy pics of my rig:

[su3_zero]

My pc... Box Cooled

[Mankz_91]

^^ How do you like your Neo2-FR?

[Ar3s]

@BuBBle.D with all those noctua fans i thought you would get a noctua heatsink.

@su3_zero wow stock cooler & akasa fans.

[su3_zero]

^^ How do you like your Neo2-FR?

It's a good mobo, good overclock... i can't run over 3.8Ghz because i'm using stock cooler...

@BuBBle.D with all those noctua fans i thought you would get a noctua heatsink.

@su3_zero wow stock cooler & akasa fans.

I'll change it... but works fine till now. 37º idle 56º full @ Rio de Janeiro... The cooler is lapped and with AS ceramique.

[Ar3s]

wasn't the shin-etsu pads on it good enough ? and doesn't lapping the cooler void the warranty ? sorry but how hot is rio de janeiro right now ? your english is fine man seen worse.

[su3_zero]

wasn't the shin-etsu pads on it good enough ? and doesn't lapping the cooler void the warranty ? sorry but how hot is rio de janeiro right now ? your english is fine man seen worse.

Today here, the temp is about 35º, but last week temp has gone up to 39º.
I don't know if lapping the cooler void the warranty, i hope that i don't need to use warranty...
The Shin-etsu pad is the Box cooler pad??

I'm thinking about buying a thermalright 120, but Here in brazil it's so expensive, R$ 250,00 + - U$ 125,00

[Ar3s]

Today here, the temp is about 35º, but last week temp has gone up to 39º.
I don't know if lapping the cooler void the warranty, i hope that i don't need to use warranty...
The Shin-etsu pad is the Box cooler pad??

I'm thinking about buying a thermalright 120, but Here in brazil it's so expensive, R$ 250,00 + - U$ 125,00

yeah the intel box stock cooler comes with shin-etsu pad as thermal paste.

wow you ambient temps are as good as mine are.

Don't worry about it. From the way i used my E6600 i'm sure the E6750 will last longer.

You're right it's expensive now. It wasn't when it just came out. Due to the numerous good reviews the price has sky rocketed. Try looking at the Xilence heatsink they are reviewing. Cost less if available in brazil.

[su3_zero]

I changed the original pad, because i remove the heatsink to clean it better...
I'll look for that heatsink, but i think it's not available here....

[Cov(enant)]

Dimensions Fan:

Size: 140 x 140 x 25
Air Flow: 29.38 CFM
Speed: 500 RPM
Number of heatpipes: 10



That's not for mATX cases !!

Heatsink: 120 x 194 x 155mm

Weight: 1155g + 130g fan

Sharka

[BuBBle.D]

@BuBBle.D with all those noctua fans i thought you would get a noctua heatsink.

Sorry to dissapoint you, but im not a noctua fan, just love silence.

[illidan]

[deepsilver]

[emoners]

@Tommy: any pics inside the case & temps on that AC Accelero Extreme?

[it_burns_when_i_pee]

@IKIKUINTHENUTZ - your machine is a good advert for thermalright

i'll get mine posted when i finish the case

[alexey]

I know...old dirty crampt case from old mod...waiting for a new one

[JaYp146]

alexey, how many wars has that case been through? The paint job's certainly seen better days ...

[alexey]

alexey, how many wars has that case been through? The paint job's certainly seen better days ...

It certanly seen better days...painted it myself but it was a single coat paint job without any primer now waiting for a lian li

[HaGGaRd]

Things are looking pretty good

[emoners]

guys, is the AC Accelero S1 better than the Zalman VF1000?