Corsair 9136 @ 1200Mhz with 2 X 2048

[ChaosMinionX]

So would 1066 binned sticks deliver similar results on a p35 board --1100 /1140 range and as such the premium paid for the 9136 stick a waste? what if you were planning on running 8gb? Trying to determine if it makes sense to what for the 9136 vs 8500 at 8gb on a dfi p35 board (w/c nb & sb)

The 8500s do 1128 fine on Maximus and probably would do 1146 if the dividers werent so messed up. I would say its a toss up, these are very solid kits. Be looking for what dinos has to say though

[Felipe]

600mhz ddr2 4gb nice work

[VinnyG]

That is very impressive, to say the least!

[Spyrus]

The 8500s do 1128 fine on Maximus and probably would do 1146 if the dividers werent so messed up. I would say its a toss up, these are very solid kits. Be looking for what dinos has to say though

I have run mine 2x2GB sticks with 5:6 and 4:5 divider from 560-577 with no issues. I have seen that you have mentioned this in another thread too.
So if they are not the modules themselves that are giving you trouble
you should not blame formula (bios 0907)

[diezel]

Impressive.

[ChaosMinionX]

I have run mine 2x2GB sticks with 5:6 and 4:5 divider from 560-577 with no issues. I have seen that you have mentioned this in another thread too.
So if they are not the modules themselves that are giving you trouble
you should not blame formula (bios 0907)

BIOS 1004 here, so I would say its the Formula...either that or it needs ridiculous voltage to go higher, I dont want to put 1.7v+ through the NB to make it stable.. I can drop the sticks on a P5K Premium and see what they do if needbe.

[Spyrus]

Ok waiting for your results.
Try moderate to see if that helps.