Quote Originally Posted by BenSanford View Post
Well I also updated to Beta 16.B10 and seem to have a problem. System steps thro until it shows a "52" on the internal display and I just have the big truck on the screen. Can't get to the Bios setup to raise voltages, etc.

Sometimes with the previous bios I had it freeze for a minute or two on boot, at the same point, but that problem had gone away. Now it's back and currently it's a LOT longer than 2 minutes...
Finally got it to boot. Had to remove two sticks of RAM, and then could boot up to the point where I could get into BIOS Setup. Then set everything (voltages and memory timings) as previous setup (I had previously needed to set all timings, etc. to get it to work with 8GB of RAM - wouldn't work with SPD timings).

Then reinstalled RAM (so M$ wouldn't start thinking I was changing too many things with my Vista...)

Now it works, but I have that damn "Pause" back at step "52" in the boot sequence that lasts for a minute or two. The screen has just started to display Memory Test in the early part of the on screen bios display (when the truck display is disabled)