replaced the heatsink mounting solution with bolts and put on ceramique, even with a tiny fan on the center heatsink I see my pwm1 at 79C after load atm.

This is a Q6600 400*9 atm.

vcore 1.5
CPU VTT 1.23
MCH 1.23
ICH 1.09
DDR2 1.9
ICHIO 1.55

I should be considerably under that shouldn't I? Temp wise? It doesn't seem to go over, atleast not yet, and cpu temp 68C max atm, but I'm worried about the PWM.