Man I love this Card! My Card runs with 820/1998/1020 on 1.19V. I think that is pretty good. Thank you guys for this nice mod.
Man I love this Card! My Card runs with 820/1998/1020 on 1.19V. I think that is pretty good. Thank you guys for this nice mod.
Ahh, finally someone has the same piece of 8800GTAny good news? To be honest, I've no idea if the jumper really works as I can't measure the vGPU from the points. I currently had the jumper at 2-3 (the 2 pins closest to PCI-E connector) so does that give 1.3V? (refer pic below)
I have also removed the heatsink and changed the thermal compound to MX2, modified the fan connector so I can control via my Zalman fan controller.
Nevertheless, I'm still keen to do some vGPU and vMem modBtw, what's the highest core/shader/mem you manage to OC?
Last edited by aoch88; 03-02-2008 at 11:24 PM.
Intel Inside
I just got me a new XFX8800GT to run in SLI with my old one which has the original refernce PCB... now the new one has a different layout... Ive already Vmodded the old one. any help on a Vmod here? im desperate at this stage
![]()
Ok, I finally got to measure the vGPU from the following points. I previously didn't contact the ground correctly so there wasn't any reading - my bad.
I've found out that without the jumper, the vGPU is 0.85v and 1.1v then 1.25v respectively. This sucks as I don't have 1.3v!!! I tried using 2 x PCI-E and 1 x PCI-E but it doesn't help in overclocking.
I need vGPU mod desperately, lol. Someone help?
Intel Inside
Yup I got the same card and have been working on a mod with Largon! The Samsung memory is definitely better and I got volt mod in place for it running at 2.2V at the moment which gives me a 1220Mhz OC. The problem with the GPU volt mod is that the tracing on the PCB disappears inside of the PCB so nobody knows where to solder the VR too. I'll get it done this week and solder straight to the L6712A! That should be fun.
The jumper only gives you 1.22V on my card which is enough to take it to 780Mhz. You need more juice to go for more!
Thanks HitandRun and LargonBtw, can you guys share the vMem mod?
My RAM can't run 1000Mhz as the stock cooling does not have ram sinks on them but just some rubber material (so called thermal pads) to contact between the HSF and RAM. It's probably too hot so I need to mod it a little and put ram sinks.
Intel Inside
Damn, this sucks, what camera's you guys use to take those pics... I only have my Nokia N95, Motorola Z8, N91...![]()
I wouldn't make all the volt mods and run the stock cooler on it if you want to burn up something! I made some custom heatsinks for my card!
Right on!
Thats what I use! Enough power for what I do!
Metering points for memory! Red to ground will get you where you want to be!![]()
![]()
Measuring point added to the pic in my earlier post.
You were not supposed to see this.
I just use a cheap digital camera. The trick is to zoom in, and pull the camera back a bit so it can focus. Lots of ambient light helps; sunlight is best. Use a tripod or items to steady the camera and use the timer, or else your pics will be blurry. Also, I took some of my very close up picks while focusing the camera lens through a magnifying glass.
Last edited by jason4207; 03-04-2008 at 09:38 AM.
ES Q9550 E0 @ 4.0GHz (471x8.5) 1.256v
TR-Ultra-120-X, 115CFM 120mm fan
Maximus II Formula @ 1884MHz FSB
Ballistix DDR2-800 (4x1GB) 1132MHz 5-5-5-5-15 4-55-8-14-11-3-8-5-4-2T
eVGA GTX 280 @ 702c/1404s/1260m (1.175v)
Auzentech XPlosion DTS-Interactive Vantage 'X'-6,727
300GB Velociraptor, PC P&C 750W
(3)120mm, (2)90mm, (1)250mm case fans in TT Armor
27.5" LCD/Z-5500-office, 95" 720P projector/7.1ch-living room
Logitech Driving Force Pro-Microsim Racing Pod
ahhhh, cool, thx for the advise guys... will give it a try![]()
Do you fix your OC Clocks in BIOS or is it better to use River Tuner to boot up new clock?
Thank you so much to HitandRun and Largon for sharing this great vMem mod. I've done it successfully and now running with 2.15V. I'll test it out and see how well it goes. Prelimanary run with 755/1875/1030 gave around 14700 3dMark06 - not very impressive though?![]()
Intel Inside
Nice idea with that heatsink.
Maybe thermalright will see it and ship heatsinks like that stock with theirs!
All along the watchtower the watchmen watch the eternal return.
Wow, that vGPU mod would be excellent. Thanks HitandRun and we'll be waiting for some pics and results.
I'll post some pics up of my modded cooler. The temps are alright, with about 42-43C idle @ 1.25vGPU. Load can go up to 55-56C with ATI Tool.
Intel Inside
hmmm looks like these Galaxy cards are REALLY good
i might go buy one to test out
samsung memoryw00t
and it looks much better around the socket now plus look at those phase![]()
oh rly simon![]()
maybe time to send an email hahahah lol
if no luck maybe get Gigabyte card instead
i like GB's quality on all products![]()
Bookmarks