yeah I edited my post a few minutes ago...lol. I found the pdf for the chip but I'm no expert, I want to see what the real modders say to check, I'm sure a mod is possible but I wouldn't want to give you the wrong advice.
yeah I edited my post a few minutes ago...lol. I found the pdf for the chip but I'm no expert, I want to see what the real modders say to check, I'm sure a mod is possible but I wouldn't want to give you the wrong advice.
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
PanMaster take a good photo strait to the Nexsem Chip i know where the FB pin is but i cant see the card in this angle
take a better pic from this side
Last edited by Vatos_locos; 02-22-2008 at 03:04 PM.
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
Whats the FB? Which part needs shading in?
Heres a quality picture taken while the card was still in the PC:
I've found this, its an x1950 but its the same Nexsem 2415 chip
http://img.photobucket.com/albums/v4...nexsemvmod.jpg
Thank you for your advice
Last edited by PanMaster; 02-22-2008 at 06:05 PM.
In most places stealing is a crime. With Paypal it's a 'business model'.
the FB Pin is the Feedback it controls the Vcore on your card the pic is correct this is the Fb pin so now you have to find the resistor that is connected with the Fb pin on your 3850 for start and then i will tell you what to do
just take a multimeter and see witch resistor measures 0Ωhms with the FB pin
post a good pic of your card it will help us a lot
ok try measuring those resistor and see witch one shows 0Ωhms with the FB
if you cant put you multimeter prob on the FB pin because the are tiny you can put it on the capacitor that is connected to the FB see the trace line in the image that leaves the FB pin and goes on the tiny brown smd capacitor
Last edited by Vatos_locos; 02-22-2008 at 06:26 PM.
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
Can somebody show me where i can do pencil mod on my HIS 3850 512mb IceQ TurboX:
Photos here:
http://i4memory.com/reviewimages/vid..._IceQ3_002.JPG
http://i4memory.com/reviewimages/vid..._IceQ3_012.JPG
http://i4memory.com/reviewimages/vid...IceQ3_004.html
http://i4memory.com/reviewimages/vid..._IceQ3_003.JPG
http://i4memory.com/reviewimages/vid..._IceQ3_006.JPG
Thx friends
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
are you fully alright man?? i dont have cash to buy another card dude uhuauhuah
yep, completely sure. if you're wary, you can wait for others to confirm what i said and it won't hurt my feelings one bit.Originally Posted by victorbr
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
Have anybody got meassure and voltage point to Gigabyte HD3850 256MB ? (Red PCB)
thx friend,i don't wanna hurt your feeling ,i am just having a bit of caution with my vgayep, completely sure. if you're wary, you can wait for others to confirm what i said and it won't hurt my feelings one bit.
hey, no problem, i completely understand.thx friend,i don't wanna hurt your feeling ,i am just having a bit of caution with my vga
the thing about pencil mods is that if your card blows up, erase the mod and rma it! while some may call this irresponsible or unethical, i believe that since we paid for it we should be able to rma it. the big manufacturers have money to replace it, we don't.
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
i believe there's someone here with that same card...
dig through the last few pages of the thread and i think you'll find your answer.
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
Can you show me vgpu measure points too?? i did the pencil mod and seems like didn't have sucess...
make sure the pencil lead took. did the resistance of R1222 drop?
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
vgpu is on 1.28v?? what i have to do??
Last edited by victorbr; 02-25-2008 at 07:36 AM.
for VGPU, set it to VDC or DCV. for resistance, set it to 20kΩ.
Gaming, Crunching, Audio Rig:
Asus ROG RIVE X79
Intel Core i7 4930K, @ 4500MHz
4x 8GB G.Skill TridentX DDR3-1600, @ 2400 C10 1T
3x AMD HD7970 GHz Editions
Samsung 830 256GB
CoolerMaster Silent Pro Gold 1200W
Sound System:
Custom DAC (RM-DAC) to a tube-rolled and tuned Xiang Sheng 708b to Sennheiser HD650s
Damn!..i shade that again and no has effect on voltage..:mad
where can i do this new mod in my vga??
http://img205.imageshack.us/my.php?i...870pmodsl4.png
thx!
I used 100k ohm set to 90k ohm and my card is burned...Do I have to use 500k ohm and what is resistance for let's say 1.5v?
HAHA i am very very happy guys..pencil mod done! now i am testing..later i put my result
You must have done the mod wrong mine 3870 can handle over 1.9v without burning and i am using 100kohms
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Please somebody show me where i have to shader for vmem pencil mod too?? thx guys
If u read the hole thread u will find it
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Hey guys..somebody knows what is that "on/ke" key on top of the HIS HD3850 512mb IceQ TurboX????thx..i have searched and didn't find anything..
Last edited by victorbr; 02-26-2008 at 10:24 AM.
NTSC/PAL switch
Finaly I got it.
I voltmoded my PowerColor HD3850 512 PCS and applied a "little" bump to 1.38V VCore. I changed the bios to the HIS HD3850 ICE3 (ver 071).
I also changed the "two wire" Zerotherm by an original "3 wire" Zerothem 810.
Now I got my HD3850@864Mhz Core and 1080 MEM. (about 30% core OC). 45° idle and 65° full load.
With my P5B Deluxe, e6600@3.6Ghz I'm near the 12500 points in 3DMark06 (12247). I'm Happy....
Last edited by chp; 02-26-2008 at 04:23 PM.
Reply With Quote
Bookmarks