Challenge the limitation of Quad-core CPU-DFI LANParty DK P35 First Look

[ztop]

http://www.xtremesystems.org/forums/...35#post2777435

someone can try this mod?

[Supertim0r]

changed the nb cooler for an enzotech

will try the U120 Extreme soon (I prefer the Tuniq of course)

[xploit]

Has someone running Cellshock DDR2-1000 C4 2GB kit on the DK P35?
I can't boot with this sticks.

Have you tried giving them the voltage they need?? I had to set mine to 2.1v

[eXclusive]

well maybe give it a try with a decent thermal paste.
btw does the board have bootbug ?

I had soem boot problems until I got the RAM up to 2.0v.

[Dr. Wakeman]

Have you tried giving them the voltage they need?? I had to set mine to 2.1v

The problem is that the Cellshock Kit doesn't boot with default settings after a cmos clear. Can't change the ram voltage with a black screen.

[eXclusive]

Boot with just the one stick by chance? Im guessing not..

[Dr. Wakeman]

Boot with just the one stick by chance? Im guessing not..

1st. try with both sticks.
2nd. try with one stick.

Result: no booting

[eXclusive]

I'd hate to say I'd get a known booting stick @ 1.9v in these boards and just getit off the egg.. I'm sure a single 1gb or 512mb stick even wouldn't cost more than $35. If you gotta friend that'd be better. I'm sure you could borrow his mem :p

[ztop]

hello.. i have problem to pass 510 fsb with this mobo..at 500 is full stable... but if i try to pass 515 te board doesn't boot. i have a 8400 that can do fsb 540 with mi asus p5k..
so i think that is the board the problems....can you tell me wich settings do you have used for 530+ fsb from bios?
thanks

[Vivio]

CPU VTT 1,28V
Vdram 2,1V
CPU PLL 1,6V
NB 1,45V
DRAM timings auto other settings in Genie BIOS on AUTO

Beware my CPU is E6300 and supports a little more voltage then your E8400.

[Prelim]

here we go...Q6600@3.8GHz (475x8) 110% primestable

14h and still running, good enough? :P DFI at his best!

System bench setup

CPU: Q6600 L740B269
Mobo: DFI LanParty DK P35 T2RS
Ram: Team Elite 2x2Gb PC6400
GPU: Oldschool Vanta LT (aka RivaTNT2)
HD: Seagate 7200.10 250Gb Single-Plate
PSU: LCPower Arkangel 850W
Cooling: Thermalright Ultra-120 eXtreme lapped and "coin modded" + Scythe S-Flex SFF21F 1600rpms / ADDA fans for prime only


Prime configs:

Q6600@3.8GHz 1.42/1.37v load
TeamElite 950MHz 5-5-5-15 1.92/1.90 load


As u can see all bios parameters are default, including FSB VTT e NB, really good, since is the first time i saw on DFI DK, 100% stability for >450fsb on default

[Sailindawg]

Very nice overclock Prelim

This is one of the first quad oc's that replicates what Windwithme initially did. You have a very good low volting cpu there. ~0.05V vdroop nice. What I find interesting is that you say that all BIOS settings are default.

Could you post your BIOS settings?

Does your RAM use Micron D9GMH IC's?

[Prelim]

Very nice overclock Prelim

This is one of the first quad oc's that replicates what Windwithme initially did.

yes, but this one absolutly stable....not 30min prime with large FFT :P

i have my doubts 500fsb is possible, having it primestable. My board doesnt even boots 500fsb on default settings

my bios settings:





i forgot to change one parameter, only now i check it; FSB VTT default is 1.2, my mistake. maybe is stable too at 1.2v

my ram isnt micron D9, if so i was at 4-4-4 :P

team elite can have many dif IC´s, such as Epida and low volt chips. dont know exactly that i have, since i never pull out the spreaders :/

[Bl4ck^!]

well , after my "peasant" MSI P35-FIR i have Dark T2 ;] so far ....

[Sailindawg]

yes, but this one absolutly stable....not 30min prime with large FFT :P

Yes, excellent work! That's what caught my attention. 475 fsb with a quad is about as good as it gets.

Thanks for the screenies!

[Vivio]

Well look what have done with DFI and Quad

[GripS]

here we go...Q6600@3.8GHz (475x8) 110% primestable

14h and still running, good enough? :P DFI at his best!

System bench setup

CPU: Q6600 L740B269
Mobo: DFI LanParty DK P35 T2RS
Ram: Team Elite 2x2Gb PC6400
GPU: Oldschool Vanta LT (aka RivaTNT2)
HD: Seagate 7200.10 250Gb Single-Plate
PSU: LCPower Arkangel 850W
Cooling: Thermalright Ultra-120 eXtreme lapped and "coin modded" + Scythe S-Flex SFF21F 1600rpms / ADDA fans for prime only


Prime configs:

Q6600@3.8GHz 1.42/1.37v load
TeamElite 950MHz 5-5-5-15 1.92/1.90 load


As u can see all bios parameters are default, including FSB VTT e NB, really good, since is the first time i saw on DFI DK, 100% stability for >450fsb on default

Dude....that's freakin noice!! Can you run blend and keep it stable? I have seen others run small FFT just fine but when they try blend it reboots on them.

[Retrolock]

Well look what have done with DFI and Quad

THAT is sick!

[jimmyz]

Well look what have done with DFI and Quad

disabled two cores.....how is that a quad? clock it with all four cores.

[Praz]

disabled two cores.....how is that a quad? clock it with all four cores.

LOL. Good eye.

[xploit]

good eye jimmy!

[Prelim]

Dude....that's freakin noice!! Can you run blend and keep it stable? I have seen others run small FFT just fine but when they try blend it reboots on them.

my pic is 14h Prime Blend

[nidecker]

here we go...Q6600@3.8GHz (475x8) 110% primestable

14h and still running, good enough? :P DFI at his best!

System bench setup

CPU: Q6600 L740B269
Mobo: DFI LanParty DK P35 T2RS
Ram: Team Elite 2x2Gb PC6400
GPU: Oldschool Vanta LT (aka RivaTNT2)
HD: Seagate 7200.10 250Gb Single-Plate
PSU: LCPower Arkangel 850W
Cooling: Thermalright Ultra-120 eXtreme lapped and "coin modded" + Scythe S-Flex SFF21F 1600rpms / ADDA fans for prime only

Can you host SG pack? Its' really nice and esy to read
Thanks

[Prelim]

SmartGuardian skin here:
http://freenet-homepage.de/Demoria/S...background.rar

enjoy

[Vivio]

I have set in BIOS VTT 1,22V, but if I test the CPU in Orthos, the VCPU is 1,28V. So the board overvolts about 0,06V. How can I make the board to not exceed the value I've set in BIOS?

How can I limit the Vcore? In BIOS there's CPU VTT and CPU special add, there are more settings related to Vcore?

Do you have similar problem?