*Official Retail G0 Q6600 Overclocking Thread*

[Prelim]

Hope it does better than 12mn Prime95
But looks like a nice chip. We have quiet near batches. Mine does quiet same performance with a 3.6GHz rock solid at 1.33v, but I need 1.43 to be rock solid at 3.8Ghz even if it SuperPi at only 1.35v at 3.8GHz. Also, those batches run hot. I see you're already at 60°C after just 12mn of Prime 95 (small FFT I guess!). You'll get much hotter when you increase volts to be stable and after 1h of Prime95 small FFT

here we go...14h and still running, good enough? :P

DFI at his best!

System bench setup

CPU: Q6600 L740B269
Mobo: DFI LanParty DK P35 T2RS
Ram: Team Elite 2x2Gb PC6400
GPU: Oldschool Vanta LT (aka RivaTNT2)
HD: Seagate 7200.10 250Gb Single-Plate
PSU: LCPower Arkangel 850W
Cooling: Thermalright Ultra-120 eXtreme C/ lapping e "coin mod" + Scythe S-Flex SFF21F 1600rpms / ADDA fans for prime only


Prime configs:

Q6600@3.8GHz 1.42/1.37v load
TeamElite 950MHz 5-5-5-15 1.92/1.90 load


As u can see all bios parameters are default, including FSB VTT e NB, really good, since is the first time i saw on DFI DK, 100% stability >450fsb on default