**Official ASUS Striker II Formula Discussion/Review/Overclock/Guide/BIOS Thread**

[RobinL]

Thank you polar bear, i will try.

[polar bear]

As I understand, higher CPU PLL is needed with higher FSB settings.

In very simple words these circuits are responsible to sincronyze the external FSB with internal processor bus where flow all signals outuput from FSB to internal processor bus (command and data) and viceversa.

Now some processors have better internal FSB PLLs than another one, and this mean that that first rpocessor has higher FSB wall. If you want to help to raise CPU FSB wall you have to raise pll voltage because in this way internal processor FSB PLLs become more stable.

[RobinL]

What voltage is stock for CPU VTT? I have it on 1.20 volt.

[polar bear]

What voltage is stock for CPU VTT? I have it on 1.20 volt.

Just check in BIOS... usually the lowest setting is stock.

[RobinL]

With higher Pll voltage the cpu reacts a lot better. But i still can't get higher
329 Mhz will freez. Vtt voltage haven't much effect on the cpu. Yet i have bios 0101, because bios version 0902 wasn`t that good to overclock with the conroe. But i have to try that Beta 1101 bios, maybe its a lot better. Had already tried a lower multiplier, but doesn`t getting higher on the front side bus.