Water Cooled Case Gallery

[De5tr0yer]

That's my problem too always when I finish my system, it begins to look boring to me I think everybody got those problems in here

I have that problem too, but it takes me too much mess and time to put all back apart and together again...

So I just close my eyes, turn off cathodes and led's and let it run until I have to dust it. And yes, I could always put another WC part inside, no matter I don't need one. But that's just me.

[Nate P.]

sorry for the bad quality. But atm I only have a 5.1mp digital camera with a 400 max iso

Hey, you can complain, I'm stuck with a 4MP camera with 200 max ISO. Just use a tripod and do some long exposure shots or get more light in.

[911us]

Update some pictures of my case



2x 140mm fans on top






Temp
Intel Quad Xeon X3120 @3600Mhz 1.26v (folding,100% load)

[71 (Bryan)]

imgonna post pics of my soon to be w/c'ed semi-modded stacker 2morrow.
gotta find a nice spot 2 take pictures =P

[nicasoft]

hi,

this is my first build of my own so be gentle
dont even mention the TT elcheapo/elcrapo, was my first wcs some time ago when I knew %$& about WCS... I will defenitly upgrade later this year.....

Spec:
Q6600 B3 @ 3.2Ghz
Maximus Forumla SE
MSI 8800 Ultra
TT toughpower 750w
2 Maxtor 80gb raid0
2 WD 250gb storage
Stacker case

1 Loop:
TT bigwater 735 el cheap-o for the CPU

2 Loop:
355MCP Pump 18w
DD blackice Xtreme II rad
D-tek Uni-sink
MCW60R vga block
Tygon 3/8 tubes



check out the beer

minor mod needed to fit the vga block

installed









I have to mention this is the first 2 loop build in my country (Nicaragua) as far as I know.....

[smee]

Very nice nicasoft!
I likey!

[disruptfam]

nice mate where is nicaragua ???

[Nate P.]

Very nice nicasoft!
I likey!

I no likey CPU block.

[disruptfam]

maybe thats all he can get in nicaragua??

if not i would defo swap it out

[filthysanchez]

[nicasoft]

I no likey CPU block.

Like i said, It was some time ago when I have no idea about WCS. I saw this, was cheap and I have no job so.. was the best choice at the time... I will change not only the block, but the radiator and pump too....

maybe thats all he can get in nicaragua??

if not i would defo swap it out

Here dont sell all this stuff... in fact most store dont know what WCS is almost all my things were bought at petra's the rest @ amazon, tiger, xoxide, frozencpu etc....

[ShArKo]

Like i said, It was some time ago when I have no idea about WCS. I saw this, was cheap and I have no job so.. was the best choice at the time... I will change not only the block, but the radiator and pump too....


Here dont sell all this stuff... in fact most store dont know what WCS is almost all my things were bought at petra's the rest @ amazon, tiger, xoxide, frozencpu etc....

I got the same problem here in argentina, most store dont know what is a water block, a pump or a rad. Here I buy all water cooling thinks on internet and then seen me all stuff in to my home...

Es bueno saber que hay latinoamericanos aca.........aguante nicaragua nicasoft

[Worlor]

My simply watercooled computer

Laing DDC-Pro
8/10 Tube of Yoplait (french yoghurt)
NexXxoS XP Gold
WaterBlock VGA NexXxoS GP2X Radeon X1800
Cape AGB-2 (I will change because it is broken)
Rad 240 Doc Micro Pro (i search a second rad)

[Bei Fei]

Updated with custom NB block and stealth block on 8800.

[71 (Bryan)]

Updated with custom NB block and stealth block on 8800.

looks like theres a bolt in the way of the fan blade

[Bei Fei]

Nope its on the outside of the fan frame. Tricky angle

[Meatpuppet]

I would reccomend that you slide the MCRES further up the mounting bracket so that the pump is being gravity fed rather than having to suck the fluid in. Just a thought.

[Snowfortrick]

My Mozart TX(a.k.a washing machine)

[Utnorris]

Ok,
I was supposed to have this done today, but I have to work, so it won't be done until probably sometime next week. Until then here is a teaser of my case. I need to add the cpu back in after lapping it along with the video card and then the water cooling system once I have leaked tested it. I will give you all the details once it is done, but this is essentially my first w/c build. Sorry for the low rez, but I had to resize them so they would upload.

Be gentle,

Utnorris

[joecop120]

I almost thought the beer was Quilmes, but thats argentinian, and delicious.

[disruptfam]

nice colours

[Nate P.]

Nice, is that Apogee GT mounting plate powdercoated or spray painted?

[peebee]

I would reccomend that you slide the MCRES further up the mounting bracket so that the pump is being gravity fed rather than having to suck the fluid in. Just a thought.

As long as the water in it is higher than the pump, there will be no problem at all.

Cape AGB-2 (I will change because it is broken)

Awesome! That res looks like a huge black dil**

Why did it break?

[Utnorris]

nice colours

Thank you. I can't wait till its done.

Utnorris

[Utnorris]

Nice, is that Apogee GT mounting plate powdercoated or spray painted?

Yeah, just spray painted it. It came out better than I thought it would. Once it is mounted I think it will really pop. I bowed the Apogee, so I am excited to see what type of temps I get once this is all done. I will lap the processor tomorrow and get my loop filled and start the 24 hour test. Anyway, this will all be for not if the performance isn't there.

Utnorris