**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Solarfall]

I don't think it's an XP issue. I've had no problem with both my GMH ram's, Dominators and TeamX. I will get some GKX Tracers soon so i'll see how this mobo does GKX ram under XP..

mad_skills i have a kit of cellshock (cl4 pc8000) ram sticks that are GKX.. they seem to need alot of juice to clock well.. i've been able to get them stable for 3d and superPi with 2.5v.. with latencys 4.4.3.3 @1200mhz

[MikeMK]

i'm interested to see how you guys attached small fans over the PWM & NB area... i used a zippy & a 40mm fan over the PWM but dunno bout the NB since it's too close to my vidcard

My 80mm stealth is attached by screwing one corner of the fan onto one of the D-Tek fusion standoffs. There is enough spare thread above the d-tek screw to mount the fan. Works really well, and is neat too! I need to grab a couple of 40mm fans for the pwm's really. Bit bothered about how noisey they will be though. And I havnt figured out how to fit them tbh.

[AriciU]

Anyone using the 02/14 yet? How is it compared to 01/09? Any idea if i can flash it on my LT... it's only available for the UT on dfi's site but i don't think there is any difference between the mobo's except for the cooling system.

[Dsjjang]

Anyone using the 02/14 yet? How is it compared to 01/09? Any idea if i can flash it on my LT... it's only available for the UT on dfi's site but i don't think there is any difference between the mobo's except for the cooling system.

No, problem~
My LT aleady flashed~
Bios font crash also edit~

[emoners]

yup...as far as i've noticed...

ooppsss... i stand corrected... 2/14 Beta

Genie Bios Setting > CPU Feature > Thermal Manageme5 Control


@MikeMK: here's how fireice2 attached a 40mm fan on the PWM area... HTH

[mad_skills]

mad_skills i have a kit of cellshock (cl4 pc8000) ram sticks that are GKX.. they seem to need alot of juice to clock well.. i've been able to get them stable for 3d and superPi with 2.5v.. with latencys 4.4.3.3 @1200mhz

That's a nice score for benching but i was rather thinking of testing the limits for 24/7 settings, but you got nice work with those GKX's, i like Cell-Shock.

[DoObs]

I can see this chip doing 4ghz, um at about 1.72v but i think the heat to the chip was the problem, and waas holding it back.

So i could try ice water but no need it should be able to do 572FSB this chip.

DoOb's

[MikeMK]

@MikeMK: here's how fireice2 attached a 40mm fan on the PWM area... HTH

Thanks emoners, that helps alot! Hopefully that will take the edge off my temps. What do u recon is the highest the PWM's can go before effecting overclocking performance? im testing @ 4.2ghz and getting around 49-51 degrees when priming.

Also, I have some swiftech memsinks sat here doing nothing. Do u recon its worth sticking them on the long chips next to the PWM heatsink (cant remember what they are called). I think they would fit - especially with some trimming.

[nikolas61]

617 fsb on air

[Solarfall]

hey nikolas61... thats one nice chips you have there... its just begging to be tested with extreme cooling

BTW what bios are you using ?????

[Dialtone]

Having issues OC'ing a new rig... See my signature for spec's

I can get the get it too boot at default volts at 3ghz. but when i try to burn it in using OCCT , Prime95, Orthos the tests fail in a matter of seconds 10 seconds to a minute.(yes of course i raise the volts for when attempting this) Everest is the only thing that doest fail.... i ran it for 30hours straight at 9x335 & 8x378. But it does seem to matter how much voltage i throw at it it wont run the other progs.

So now i'm starting from scratch ... it primed at stock speed 1.8ghz over 24hrs... now i'm priming it at 2Ghz.....I am unsure about what range the PWN temps should be around.. to me mine seems high....

CPU VID = 1.48
NB = 1.61
VDIMM = 2.1
FSB VTT = 1.58

Temps Load ... Temps idle...
Cpu = 50C Cpu = 27C
Chipset = 39C Chipset = 35C
Pwn = 45C Pwn = 42C


Any advice input would greatly be appreciated.. i was stoked when i ordered this mobo cuz of all its Gr8 OC'ing features and stability and seeing the results you all are getting with this mobo... so now i am just hoping its the cpu thats just not liking the oc'ing

E2160 SLA8Z M0
Batch Q733A001

[nikolas61]

BTW what bios are you using ?????

02/14 Beta

[ACE76]

I just put my P35 UT board back in my case as I was truly dissappointed with the P5E3 Deluxe...anyway, haven't done any long stress tests yet, but my E8400 is working like a charm so far at 8x525 (4.2ghz)...BIOS vcore is set at 1.375 and northbridge is at 1.53....I originally wasn't using GTL timings but decided to give it a go...with all of them set at 67 I was able to lower my vcore to what it is now....otherwise I was at 1.4.

I think with some more tuning, I will be able to get it even lower...I don't know why I even tried that ty Asus board...this DFI board is by far the best clocking board I've used in the last 4 months....by the way, if anyone is interested, I'm using the Coolit Freezone Elite to cool the CPU. Will take screenies later after some more testing.

[emoners]

I just put my P35 UT board back in my case as I was truly dissappointed with the P5E3 Deluxe...anyway, haven't done any long stress tests yet, but my E8400 is working like a charm so far at 8x525 (4.2ghz)...BIOS vcore is set at 1.375 and northbridge is at 1.53....I originally wasn't using GTL timings but decided to give it a go...with all of them set at 67 I was able to lower my vcore to what it is now....otherwise I was at 1.4.

I think with some more tuning, I will be able to get it even lower...I don't know why I even tried that ty Asus board...this DFI board is by far the best clocking board I've used in the last 4 months....by the way, if anyone is interested, I'm using the Coolit Freezone Elite to cool the CPU. Will take screenies later after some more testing.

screenies & rig pics would always be nice

congrats on the DFI board!

[Krzychu]

Hi,

I need some help with overclocking my E8200.
I got it Prime stable @ 3,6 GHz with Vtt=1,10, Vcore=1,26250 and GTLs @ 66/66/66
Right now i'm trying to hit 3,8 GHz but no success.
Can do SuperPI 32M, 3DMark06 but in Prime 1st thread always fails after just 3-10 seconds. Btw when i have any errors it's always on 1st thread
My current settings are:





I'm still trying to reach on this Vcore 3,8GHz but i'm bit lost with GTLs - tried them from 50s to 66s, autos and results are the same.
Any help/suggestions please? Thanks.

[emoners]

@Krzychu: try disabling GTL & just play around with VTT & VCore...to make it easier. & maybe loosen your RAM timings...

[Bl4ck^!]

24hours until i get my DK P35-T2 Gainward G92, and E8200 , going to test it with my D9GMH (aXeRam Transcend) and OCZ (Promos probably )EPP ;]
Stay tuned.

[Kean]

Version LT have CPU digital power section.
Does DK have it too? Because on DK are coils and many mosfets. On LT are not.
Does digital PWM and 8 phase have big influance on droop and max MHz of CPU?

[mad_skills]

Does digital PWM and 8 phase have big influance on droop and max MHz of CPU?

It's important if you have a quad-core cpu.

[Jupiler]

Version LT have CPU digital power section.
Does DK have it too? Because on DK are coils and many mosfets. On LT are not.
Does digital PWM and 8 phase have big influance on droop and max MHz of CPU?

DK is analog.
VDroop is better on the LT then on the DK, 0.01V droop on the LT vs 0.03V on the DK. (from my own experience with a quadcore on both boards)

[mrcape]

Anyone using Team Group memory here?

I have a kit of TXDD2048M800HC4DC coming and I want to try it on this board. Pretty sure this is d9 gmh.

[mad_skills]

Anyone using Team Group memory here?

I have a kit of TXDD2048M800HC4DC coming and I want to try it on this board. Pretty sure this is d9 gmh.

I have 2x512Mb kit of Team Xtreem PC6400 4-4-4-10 (TXDD1024M800HC4DC) with D9GMH microns and tonight i will try some SPi1M and some max frequency and post some scores.

[mrcape]

I have 2x512Mb kit of Team Xtreem PC6400 4-4-4-10 (TXDD1024M800HC4DC) with D9GMH microns and tonight i will try some SPi1M and some max frequency and post some scores.

Thanks bro!

[AriciU]

Thanks bro!

I have the HC3DC's, 2x1Gb. You can checkout how they did here -> http://www.xtremesystems.org/forums/...d.php?t=177531

Great memory for 4-4-4-4 IMO. They wouldn't stay memtest stable at 5-5-5-15, 600Mhz, performance level 7 but 5-5-5-15 sucks anyway

[.:R32]

Alright, I am a long time lurker here, and I did read through most of this thread to no avail.

I have this board running the 2/14 Bios and I cannot for the life of me figure out how to run half multipliers on my e8400.

Thanks guys,

.:R