Quote Originally Posted by mc2k View Post
what strap and fsb you are using, and did u enable TB/ or dram static, because these settings plays a big role and those 2x2 seems to be more responsive with TRD lvls, but it sounds like u have a divider issue which I had also experienced or like Leefhoofd suspecting u didnt pumped enough NB volts in it. Please post your bios settings so we can help u much easier
Hi mc2k,

Thanks for the reply. Please find my bios settings below.

I'm at 266 FSB (not overclocked yet) with a Q6600 (eventually I will be at 400 FSB or just above because that's what it ran at in my last motherboard).

Transaction Booster and DRAM Static are both at AUTO. I'm not technical enough to understand what you meant by "TRD lvls" and whether I'd want high or low numbers for those.

Thanks.





Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : AUTO
FSB Frequency : 266
FSB Strap to North Bridge : AUTO
PCI-E Frequency: 100
DRAM Frequency: DDR2-1066
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time : AUTO (also tried 42)
Write Recovery Time : AUTO
Read to Precharge Time : AUTO

Read to Write Delay (S/D) : AUTO
Write to Read Delay (S) : AUTO
Write to Read Delay (D) : AUTO
Read to Read Delay (S) : AUTO
Read to Read Delay (D) : AUTO
Write to Write Delay (S) : AUTO
Write to Write Delay (D) : AUTO
DRAM Static Read Control: AUTO
Ai Clock Twister : AUTO
Transaction Booster : AUTO

CPU Voltage : AUTO
CPU PLL Voltage : AUTO
North Bridge Voltage : AUTO
DRAM Voltage : 2.10
FSB Termination Voltage : AUTO
South Bridge Voltage : AUTO
Loadline Calibration : AUTO
CPU GTL Reference : AUT
North Bridge GTL Reference : AUTO
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
DDR2 Controller REF Voltage : AUTO
SB 1.5V Voltage : AUTO

NB LED Selection : NB Volt
SB LED Selection : SB Volt
CPU LED Selection : CPU Volt
Voltiminder LED : ENABLED

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled