WR Nvidia singlecard | ASUS 8800GTS 512 TOP | Foxconn Quantum Force Scholarship

[BadNizze]

Congratz Elmor! Good to see that you breaking WR´s!

[NH|Delph1]

Congrats Elmor

//Andreas

[Nosfer@tu]

Amazing Elmor

EVIL SHADER OC and What a PSYKO SCORE

[nachthymnen]

Fantastic scores and unbelivable shader's clock

[KTE]

Very nice elmor, results with that setup = impressive

Probably the quickest strap. Imagine all that on a no CB LN2 CPU, 120MHz PCIe and some better RAM now... trying it anytime soon?

[Newblar]

Wtf Insane Shader??

[scottc19]

Great job, I still can't get over those crazy shaders!

[xwards]

very nice scores

[SF3D]

Gongrats Jon!

Sick shader clock indeed

[Harshal]

3GHZ Shaders!!!! Congrats on .:WR:. elmor
Black Ops.. Man dat boards going to own a lot in near future.. aint it??

GTS and 270L of LN2
KP

[elmor]

Thanks all

Very nice elmor, results with that setup = impressive

Probably the quickest strap. Imagine all that on a no CB LN2 CPU, 120MHz PCIe and some better RAM now... trying it anytime soon?

Higher PCIe frequency seems to cripple the cards overclock

[quake6]

One question... How much shader raise score against core? Is it better to raise core or shader?

[elmor]

One question... How much shader raise score against core? Is it better to raise core or shader?

It's best to have balanced clocks, I believe they scale about the same.

Oh, btw. I tested the other GTS today

[Zeus]

Dang Elmor, what's the secret to those insane core/shader clocks?

What brand are your cards and which driver do you use?

Insane clocks man!

[elmor]

Dang Elmor, what's the secret to those insane core/shader clocks?

What brand are your cards and which driver do you use?

Insane clocks man!

Check topic They're ASUS TOP-cards:



Stock speeds are 740/1800/1035.

The "secret" to getting highest possible clocks is to run about 1.5vgpu under load, really low temps (about -150) and keeping the PCIe-clock low.

[quake6]

I make vgpu and have one problem...If I put above 1.32v it just freeze in benchmark.It run all good until it have to show result,then black screen... What could be a problem?

[elmor]

I make vgpu and have one problem...If I put above 1.32v it just freeze in benchmark.It run all good until it have to show result,then black screen... What could be a problem?

First thing that comes to mind is heat?

[nachthymnen]

Ridiculus shader's clock
No other words to say

[quake6]

First thing that comes to mind is heat?

Cooled by accelero x1 and some heatsinks for mosfet... Temperature never passed 60°C,never...It was also on the window and outdoor was about -8

And something else.If I bench 830/2072/999 it pass,but if I bench the same settings but with 1.35v,1.4v,1.45v it froze

[elmor]

Cooled by accelero x1 and some heatsinks for mosfet... Temperature never passed 60°C,never...It was also on the window and outdoor was about -8

And something else.If I bench 830/2072/999 it pass,but if I bench the same settings but with 1.35v,1.4v,1.45v it froze

Are you cooling the mosfets on the card properly? If you do I have no idea what can be causing that

[G H Z]

These look like fun cards, thats good info on PCIe clocks.

Thanks elmor and congrats on the record

[quake6]

Are you cooling the mosfets on the card properly? If you do I have no idea what can be causing that

Yeah,they are cold...

[Zeus]

Ooh these top versions are miles ahead of the vanilla version.

*starts searching for top version, vanilla GTS anyone? *

What memory is on those, qimonda or samsung?

How low is low for PCIe clock?

I used to use 115MHz, is that too high?

[elmor]

These look like fun cards, thats good info on PCIe clocks.

Thanks elmor and congrats on the record

Thanks

Ooh these top versions are miles ahead of the vanilla version.

*starts searching for top version, vanilla GTS anyone? *

What memory is on those, qimonda or samsung?

How low is low for PCIe clock?

I used to use 115MHz, is that too high?

My cards have Qimonda 1.0ns-chips and I was running stock PCIe (100MHz).