i'm confused do you have two systems bundymania or is this just a revision?
i'm confused do you have two systems bundymania or is this just a revision?
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
I think its a revision of the previous system, looks great btw
actually, i got 4 systems runnin´atm - Main Sys. -> Aurora: Lian Li G70 (Specs in my Sig.) - 2. Little Devil: (AM2 Sys. , as shown above, mostly used by my girlfriend and for lan gaming etc. ) and an IBM Laptop and an older Surf PC
Last edited by bundymania; 02-14-2008 at 08:14 AM.
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now 
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
Hi guys just reworked my dual loop system as the DD D4 pump i've had for years has finally worn my ears out. I've switched to a single loop catered for quietness.
Heres how it looked before
And heres what it looks like now.
The hardware it's running is getting on a bit now
Asus P5B-D
C2D 6400
2GB 1066 ram
2x500gb HDD's raid0
7900GS
Enermax liberty 620w
Colling kit
Thermochill HE120.3 + 6 Xilence fans
DDC + alphacool top
DD TDX
DD chipset
Maze 4
T line
1/2" clearflex
ahhhk i getcha now both systems have similar theme going on there.. bit hard to tell when you just post internal pics both look goodactually, i got 4 systems runninŽatm - Main Sys. -> Aurora: Lian Li G70 (Specs in my Sig.) - 2. Little Devil: (AM2 Sys. , as shown above, mostly used by my girlfriend and for lan gaming etc. ) and an IBM Laptop and an older Surf PC
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Hey you stole my monitor!!Nothing special compared to most of the builds on here
Specs in sig, and sorry for the bad pics......
looks like it is about to fall off the back of the desk
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
@dark_redeemer
you could try using a polarizer so that the insides will show up more clearly from that angle.
Rig Specs
Intel Core 2 Extreme QX9650 4.0ghz 1.37v - DFI Lanparty UT P35 TR2 - 4x1GB Team Xtreem DDR2-1066 - Palit 8800GT Sonic 512MB GDDR3 256-bit
160GB Seagate Barracuda 7200RPM SATA II 8MB Cache - 320GB Western Digital Caviar 7200RPM SATA II 16MB Cache - Liteon 18X DVD-Writer /w LS
640GB Western Digital SE16 7200RPM SATA II 16MB Cache - Corsair HX 620W Modular PSU - Cooler Master Stacker 832
Auzen 7.1 X-Plosion - Zalman ZM-DS4F - Sennheiser HD212 Pro - Edifier M2600
Custom Water Cooling
Dtek Fusion Extreme CPU Block - Swiftech MCR-220 - Swiftech MCP655-B - Swiftech MCRES-MICRO Reservior - 7/16" ID x 5/8" OD Tubings
Dual Thermaltake A2018s 120mm Blue LED Smart fans.
www.mni-photography.site88.net
@ bundy
your system seems to be known worldwide
but they are great
now some pic's of my system
greetz
Code:e6420 @ 3,6GHz | 2 x 2GB Mushkin XP2-8000 | Gigabyte GA-P35-DS4 Rev 1.0 XFX 9600GT @ 800/1950/1050MHz | Enermax Liberty 500W | Lian Li V1000 plus b cooled by AF Soleil01, EK-FC9600 SLI nickel, Mora 2 Pro, Laing Pro
coolhand, watch that foam under that DDC, could cause the pump to overheat and fry.
i haven't problems with the temp, because there is an 120mm fan in the front.
it cooles HDD's an the DDC.
Its just warm, but not to hot for overheat
greetz
Code:e6420 @ 3,6GHz | 2 x 2GB Mushkin XP2-8000 | Gigabyte GA-P35-DS4 Rev 1.0 XFX 9600GT @ 800/1950/1050MHz | Enermax Liberty 500W | Lian Li V1000 plus b cooled by AF Soleil01, EK-FC9600 SLI nickel, Mora 2 Pro, Laing Pro
just a suggestion cause ive seen those ddc's fry without airflow under the pump for the motor.
Where? Who?
Mine's been fine sitting on bubble wrap since June
Thought I would share my res.
Last edited by HotGore; 02-15-2008 at 06:29 PM.
What the hell is in that thing Gore?
That is my res. I didn't properly clean out my PA120.3.
Here is my EK 8800 block.
Last edited by HotGore; 02-15-2008 at 06:32 PM.
Lol, I washed the FC8800 block 2 days ago and it's worse than this. Like you, I didn't clean the PA120.3 sufficienly.
To remove this dirt, you need to use vinegar with salt first to remove the tarnish and show the copper. After this, rinse with water and arm & hammer to neutralize the vinegar then rinse thoroughly.
Here is my pump. First time I have ever opened it :P
oh wtf
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
ouch town, population you bro. (yes i know corny dodgeball quote, but i feel it was necessary.)
Im guessing you only used distilled water then, no anti-bacteria or a corrosion inhibitor or anything?
This is not enought.
I use distilled, PT Nuke, and green food coloring. This time I am not going to use food coloring.
weird
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
So how do you rinse Thermochill rads right? I rinsed mine with boiling distilled water and no flux or anything came out, it was clear. What am I doing wrong?
Posting Permissions
Bookmarks