Quote Originally Posted by DamienKC View Post
e8400 SLAPL q746A pack date 1/15/08

OCCT stable on 500x8 (4ghz) @ 1.312v

can't get it to boot at 4.1 no matter which multiplier, haven't messed with anything but cpu and ram voltage

temps are 42c idle / 63c load. think i have myself a good chip overall 4ghz isn't as high as some but it's at a decent voltage and temp at least.

i can't figure out what to mess with on my bloodiron to get it to boot past 4.0 though
My E8400 has done very well on my Blood Iron(God I love DFI's BIOS) It is good up to 4400MHz on air w/ what appears to be a FSB Wall but once I put it under DICE I was able to hit 5388MHz w/ it.

1.74v on a wolfy works wonders


If you set your

SB 1.05v to 1.15
SBCore/CPU PLL to 1.75
NB Core to 1.61
CPU VTT1.4~1.5v

you should be able to go over 4GHz.