8800GT voltage mods

[scottc19]

I have deluge's board and I have been trying to fix it. It boots up and the motherboard makes a long beep and nothing shows on the screen and the board is showing no volts... Anyway I managed to have it start up once, after soldering on some resistors and making a trace, with the beep no image however, and it showed 2.1v!!! So I shut it off and went to change it to another resistor, but somehow I messed the rest of the other traces up... Anway the main point is that after the traces were destoryed the rest of the way I used two variable resistors from each of the two black points I circled and set them both close to 15 ohms. I went to a variable resistor and then straight to a ground, as the other traces are no longer hooked up. Do I need them to be? because the board still shows no sign of volts... It seems that the other point I circled in black might have got messed up, but I dont see any traces that go to it, so maybe it was just used to hold the chip on... anyone have any ideas on what to do... I'm pretty sure this board is a gonner, but any ideas would be great. I think this is the data sheet, but Im confused on how to read which points corralate to where... Anyway http://www.primarion.com/PrimarionMa...s/PDB-3544.pdf