Quote Originally Posted by madfaze View Post
both perhaps...

just wanna be safe and dont wanna fry or overvolt on somethin' inside the mobo...
NB/HT volts on K8 = none need to be adjusted unless going high on HT for added safety. I've done 2GHz HT with K8 on stock volts.

NB/HT/IMC volts on K10h;

NB volts don't need to be touched when oc'ing.
HT volts don't normally need to be touched till at least 2.5G or high HT ref. One bump up can usually settle 2.6G stable.
IMC volts need to be adjusted depending on the chips capability, requirement, speed and RAM speeds/timings. IME 1.25VID will be fine for <2.16G only, then a bump to 1.3VID will cruise to 2.4G fully stable. Past 2.45G starts demanding higher volts.