No PCIe choices in the BIOS's so far madfaze.
PCIe speed will improve perf. in GPU benches. Up-to 140MHz I know will show gain but use an IDE drive if you move it past 120MHz and not a SATA.
Dave, I reckon this board needs some revamping. The PWM area is weak for plus 2.7G oc with Phenom IMO and then starts to need much extra cooling.
The options you're wanting to see can all except NB VID/Multi be seen in AOD you know. Even CPU VID/Vcore is shown there. But the best half of what you mention is the multi's and VIDs selectable within the tool and shown in digital form. That would be best.
My Phenom reports wrong temps now, this is a new thing since the last couple of days. Idling at 2kRPM fanspeed 1.272V 2600/2400/533 (MHz), it is showing 24C idle across all cores whilst the room ambient is 25C and the heatsink ambient is 28C. I would call that a minimum real temp. of 35C of all cores since a) core IHS is always hotter than heatsink ambient b) at over 70W TDP in even idle c) core internal is always minimum 10C even hotter than the Tcase d) most parameters including voltage is increased much so imagine what the stock temperature readout would be -> sub-20C for sure. The image speaking most words =>
THUS from now on, I'm only going to report all temps +10C offset from all s/w readouts.
Reply With Quote
Bookmarks