Is there any location to get ALL the BIOS revisions in one download? This would be very beneficial to basically flash through the various revisions and see which ones work the best for me.
Im about to install the latest 2602 (2nd release within a month?!)
Last week after not being able to run a stable 3G overclock (around 5.5 hrs is when I got the 1stg error in Prime 95). I then loaded defaults and ran memtest for about 30min the next day thinking it might be the memory. After coming back up to my room to check the status...the PC had shut off...not reboot...shut off.
I then tried to boot up again and it would not post at all. It would simply shut off after about 30sec. I initially though it was because I was bumping up the mem voltage from 1.9 to 1.95 so I tried to restore defaults but it would still not post.
The next day I opened the box up and tried testing the RAM. I took both sticks out. I then put one back into one of the orange slots I've always used and it booted right up. I then tried the other orange slot with the same stick (same story). I took that stick out and did the same with the next stick (same results).
Next I stuck both of them (dual channel config. like I initially had). I booted up...the post took VERY long...after almost a min on the initial splash screen...I considered it a bad post and restarted. I tried again and it posted...very slowly (not sure if this is dual channel related-it seems to be).
So anyway I set the RAM to run 800mhz @ 5-5-5-15 with 1.9V (factory "overclock" settings) ran the latest memtest version for about 3 hours and it seemed fine...about 6 tests and no errors.
I booted up this morning and got the BIOS message the "overclock failed"![]()
This board is beginning to be a real pain in the ass. I could have got an MSI Neo series for half the price and from Im hearing nowhere NEAR the amount of trouble that this board is providing.
T_Ski: thanks for the in-depth response to my posts, man ( appreciate that )
....off to try an other BIOS



)
Reply With Quote

Bookmarks