**Official e8400/e8500 Retail OC Thread

[X.T.R.E.M.E_ICE]

have you tested it on X38/48 to see if there's a difference ?

I had a X38 asus Maximus formula but sold it as it was a piece of crap to overclock, about 1 week before i bought my E8400. So no i haven't tested it on a X38. I will be testing it on a EVGA 780i on friday.

[GLENBOY]

anybody got any results for q750A fpo batch chips

[FlyBoyGeo]

I had a X38 asus Maximus formula but sold it as it was a piece of crap to overclock, about 1 week before i bought my E8400. So no i haven't tested it on a X38. I will be testing it on a EVGA 780i on friday.

Did you ever test it on that evga mb? How did you do?

[.OCX]

Latest 333 Strap Orthos + Pink Floyd Testing

Ratio CMOS Setting : 9
FSB Frequency : 445
FSB Strap to North Bridge : 333
PCI-E Frequency: 100
DRAM Frequency: DDR2-1068
DRAM Command Rate : 2T
DRAM Timing Control: Manual 
CAS# Latency : 5
RAS# to CAS# Delay :5 
RAS# Precharge : 5
RAS# ActivateTime :15


DRAM Static Read Control: DISABLED
Ai Clock Twister : STRONG
Transaction Booster : DISABLED
BOOST: 0

CPU Voltage : 1.2815 ~ 1.264
CPU PLL Voltage : 1.5 ~ 1.632v
-Many users reporting 1.5 stable.

North Bridge Voltage :1.61 ~ 1.65v
-Needed for 440+ FSB on this Board.

DRAM Voltage : 2.24

FSB Termination Voltage : 1.22v
-Many Users reporting 1.20-1.22v Stable

South Bridge Voltage : 1.05v
Loadline Calibration : ENABLED
CPU GTL Reference : .61x
North Bridge GTL Reference : .63x

DDR2 Channel A REF Voltage : AUTO ~ 1.184
DDR2 Channel B REF Voltage : AUTO ~ 1.184
DDR2 Controller REF Voltage : DDR2

SB 1.5V Voltage : 1.50v