New Memory Tweaker for Intel Chipsets

[Lestat]

can not change cas latency with 965GM chipset felix
it wont even let you select anything, the drop down works but if you click on 4 or 5 or 6 or 3 it doesnt change it stays at cas5.

[Pyr0]

you cannot change the cas latency using memset (mentioned a few times in this thread )

[Lestat]

you cannot change the cas latency using memset (mentioned a few times in this thread )

ya used to be able to
oh well

[Pyr0]

cpu-z may have registered a change in cas, but there was no performance benefits, meaning the change did not actually work

[Compiller]

Please add a support for VIA KM400/400A VenID/DevID 1106/3205
If change all 06118931 to 06110532 - it all works perfectly.

[Dirton]

New beta version: MemSet35beta.exe

-Add spd informations on Intel chipsets with DDR/DDR2/DDR3.
-Add support for Intel PM965/GM965 (Mobile) chipsets.
-Improve reading memory frequency with Intel extreme CPU.
-Improve reading Command Rate with intel P35/X38 on some boards.

For spd infos, only the best JEDEC profile is show, or EPP / XMP when it's possible.

Probably some bugs with this version, by the way report me...

Thanks FELIX! Everything works fine by the first look. Here are my results with a pair of PQI ram modules:

Will there be more timings to tweak in the further versions or 965 mobile chipsets are only limited to this ones? I would like to play with tRC a bit.

[Charles Wirth]

Hope you can get the Skulltrail update done soon

[FELIX]

->compiller: VIA don't provide any datasheet for their chipsets, so impossible to
add support .

->FUGGER: it's a server chipset, without most important timings (CL, tRCD, tRP and tRAS are not documented)
I'll try to update in 3.5 version.

[Charles Wirth]

Here is what I can see now, the version you emailed works.

[dom993]

Felix,

Thank you for your great MemSet. I have just migrated from Athlon64 X2 3800+ @2.6Ghz to Q6600, currently running 3.0GHz (333x9 / 333 strap) (on retail stock cooler), so excuse me for a newbee question...

... I set Command Rate to 1T in BIOS (Asus P5K vanilla). CPU-Z 1.43 shows Command Rate 2T ?! Now the interesting thing : I launch MemSet, within 2 secs CPU-Z shows Command Rate 1T !!! I exit MemSet, CPU-Z shows 2T again

To your knowledge, is this a CPU-Z bug ?

Thanks again,
Dominique

P5K v1.02G
Q6600 G0 @ 333x9 on stock air / 1.375v BIOS / 1.33v Idle / 1.27-1.23v Load
OCZ Reaper 6400 @ DDR800 4-4-4-15 1T (???)
7600GS /512 Silent + 7600GS /256 Silent
Antec Sonata III w/ Earthwatt 500W

[Amey]

Does 3.5 Beta work on Abit IX38 QuadGT ?

[Harshal]

It should buddy... why dont give it a try and then feedback!!

[Hazzan]

@FELIX : not working on ABIT IX 38 QUAD GT with Memset 3.5beta

[FELIX]

and what is the problem?

[Hazzan]

I cant use memset 3.5beta.... like crash on memset, only work double click shortcut and exit on tab in memset..

[zbogorgon]

@FELIX : not working on ABIT IX 38 QUAD GT with Memset 3.5beta

It's like it only shows timings, you cann't do anything else, nothing is clickable or sth.

[DualCpuUser]

That's my problem on Vista x64, displays and that's it with 35beta.

Oh and put a link on your website to get/try the beta's.

Ty

[FELIX]

...when Apply and Save button isn't show, it's cause the MCHBAR is locked in Write.
You can check it by: Open WPCRedit on PCIBus :0 Device:0 Function:0 and look at
OffSet F4, bit[0] :if it's at 1, MCHBAR have been locked in write by the bios.
And unfortunately, it's a "read only" bit, You can't write 0 in this bit.

[georgesod]

Abit ip35pro latest beta bios. It doesn't work as usual

[farookh]

...when Apply and Save button isn't show, it's cause the MCHBAR is locked in Write.
You can check it by: Open WPCRedit on PCIBus :0 Device:0 Function:0 and look at
OffSet F4, bit[0] :if it's at 1, MCHBAR have been locked in write by the bios.
And unfortunately, it's a "read only" bit, You can't write 0 in this bit.

Felix is there ne way to open the F4 bit its set to read only on the ix38 quadgt
Shows up as MCHBAR locked in memset 3.5beta

[JacKz5o]

Nice find, works well.

[pijany]

works really great on my abit nf-7s whit a-data vitesta pc4000.
I'm testing beta for now it's stable for me. next week i'll get new memory and mobo we will see
Good job Felix

[xgman]

I can run 3.4 fine, but 3.5 says "unable to execute file in temporary directory" Error 5 Access Denied" when I click on the downloaded file. Any ideas why?

I moved it to an empty folder and then it ran the setup.

[msgclb]

Felix here's MemSet 3.5 beta on my EVGA 780i. Has it been updated for the 780i chipset or is it normal to see NVIDIA NForce 680i SLI?

[FELIX]

->xgman: no idea, perhaps cause the executable file is not in a good folder...

->msgclb: I know this "problem", cause 680 and 780 have the same device ID, Same thing with X38 and X48:
I need to find an other way for identified these chipsets...