Water Cooled Case Gallery

[CowGuy]

Heres mine,

I love the background you have! Do you mind linking me to where you got it?

[coolfris]

I love the background you have! Do you mind linking me to where you got it?

http://www.blurburger.com/shoebox/toons/toons.html

[AussieJester]

I have been building a cube case some may have seen the worklog here on XS, the log details the build of the case and watercooled HDD rack for those interested, oh i have to add the gpu block still my custom block from my old ati card doesnt fit this NVidia 8800gt super. Anywayz heres an assortment of pics of the case and watercooling at this time (that one green fan has been replaced by blue led to match rest)



Click Here for full size pics



Click here for full size pics



Click here for full size pics



Click here for full size pics



Click here for full size pics



System Specs:- Intel Conroe E6600 OCed 700mhz (30 & 31 idle...Ambient 22, .have yet to benchtest as system was finished 2 dayz ago) 2GB GEIL 6400 ram,NVidia 8800GT Super 1GB gfx Card, MSI Platinum mobo, Custom water block, custom HDD rack, custom case, d5 pumps X2, custom reservoir custom fan shrouds....

[sargatanas]

matt, what ram blocks are those? more pics?

it's a mips ram freezer4

[amd_hardcore]

hello im new around here.. and im from malaysia...

dis is my case and water cooled... sorry for the messy wires....

old loop , old pump




new loop new pump

[disruptfam]

aussie jester nice matE!!!

Lowfat excellent looks very cool

[matt100]

matt, what ram blocks are those? more pics?

it is indeed a mips ram freezer 4..

here's an inside pic

[disruptfam]

Just redid my loops:






This was the loop before:

wow it 's like im looking @ a mirror!!!

mesh next to the mobo.. middle divider polished lol

seems very familiar

[Matias23]

Hi this is my Silverstone TJ07

[Nate P.]

Nice! LOL, you got 4 different fans of that rad...

[Matias23]

Yes but this is just for now, in may i will change almost everything inside so as fans i want NANOXIA.

[rafwlkp]

Yes but this is just for now, in may i will change almost everything inside so as fans i want NANOXIA.

Nanoxia fans aren't good. Noisblocker is more quiet.

[Matias23]

Or maybe this and spray blades green i dont know yet we will see

[dnb#]

Or maybe this and spray blades green i dont know yet we will see

Those scythe slipstreams are dead quiet and seriously good man I have one installed at my intake. Now I want 2 of those on my rad!

[lohoutlaw]

Well since i only posted like 2 pics some were in this thread.
Someone asked for more pics.
So here you go.
Specs in signature
Oh ya, i just got done dusting here out as well.
And also 1 of my cards is on it's way to EVGa for a warranty

[rbsmontemor]

Very Nice

Rbs.

[lohoutlaw]

Very Nice

Rbs.

Thank you

[Waterlogged]

lohoutlaw, That is one of the ways you don't want to mount a D5. It should have said so in the paperwork that came with the pump.

[joecop120]

Thank you

I'm pretty sure the pump isn't supposed to be mounted like that....

[lohoutlaw]

lohoutlaw, That is one of the ways you don't want to mount a D5. It should have said so in the paperwork that came with the pump.

I'm pretty sure the pump isn't supposed to be mounted like that....

Hmm, the only thing i see that Swifteck recommended is to mount pump on bottom of case.
Source:
http://www.swiftnets.com/
Install pdf file here

Although i did have to work a while to get system full of fluid and the performance has not given me any problems.
But thank you for your words of caution. Dully noted for my future builds.

[Waterlogged]

Hmm, the only thing i see that Swifteck recommended is to mount pump on bottom of case.
Source:
http://www.swiftnets.com/
Install pdf file here

Although i did have to work a while to get system full of fluid and the performance has not given me any problems.
But thank you for your words of caution. Dully noted for my future builds.

Ahhh, Looks like Swiftech should start including this as well.

http://www.xtremesystems.org/forums/...2&postcount=18

[The0men]

I am sorry for having so many pictures, but I did not want to
go and make a whole new thread just for this. It is a
little bit of messing around with an Armor, the gear is in my sig.

Used 3 Scythe S-Flex on the front, F type 1600 RPM.

I have an idea in my head about mounting a 120mm fan on the floor
of case between my to pumps on intake, with a custom shroud so it's
sitting up at about 30 degrees towards the rear, just to blow
cool air over the unisink and SB and out the back of the case.

I hope it doesn't look to dodge to be Xtreme!

01 Had to shave a mill or so off to make the HR09 Squeeze into the gap.



02 Also had to make new mount from aluminium and rubber pad.



03 Knocked out pins with hammer, drilled out holes, now I can use the back plate with MCW30.



04 Unisink combo, looks weak, but preforms relatively well.



05 Sporting my new Scythe S-Flex 1600RPM fans. (I do have the 5 1/2 bay covers on with filters, but not for this photo.)



06 Just before I filled it up.



07 Yes it is filled, and yes, my case needs cleaning



08 I think the blue and green go well.



09 It does look a little bit messy on the outside.



10 I don't know how to guage good flow without a metre, but that looks pretty good.



11 ClearFLEX 60 fat tubing is pretty kink resistant.



12 I don't actually have these dominators in atm, Spot cool used because no RAM coolers fit.



13 Probably the best of a bad bunch of photos lol.



14 You can really see the flow difference from the D5 1/2" loop to the very weak Tt 3/8" loop.



15 I don't know how good that fan mounting is, but it works, and yes they both flow the same direction.



16 The last photo, all covered up by the side panel.



Thank you for viewing, sorry if this post is too long.

[disruptfam]

look good mate!

probably should of started own thread

[starlon]

Ok, went through the entire thread. Took all night. I have to say there are some nice rigs here, and I regret ordering some things now. Looks like I'll be returning a big box this week and making a new order. Thanks for posting your pics!

[_Rock_]

Hey there m8s!

I've been reading this thread here for a long time, however I have only registered myself a few days ago. There are some really nice rigs here, great to see that there are more guys like me that like nice and clean Water-Cooled rigs...:p

Here's mine, the hardware installed on it is nothing special. I have a far better machine, though not watercooled at the moment..(will be, as soon as I get enough money----> TJ07 )





What do you guys think?


Cumps,

_Rock_