Ace-a-Rue

The absolute max FSB and MHZ i had yesterday was 495x9 with Vcore of 1.6, temps in guru showed 50c but they're probably wrong. And that wasn't stable. Max stable i was able to get is 4.25Mhz at about 1.54

Again memory is not a bottleneck, yesterday i booted up 500x6 and memory was fine, so is the front side bus i guess

I really can't do the heatpipe mode since its so difficult to work in this case and i would take me half/day to take out/put back in all the stuff in the case

How can i find out VID? I see people have vid in the coretemp but i got vista x64 and its not working so any other way?

I have EIST and C1E Enabled Right now, running it everything stock but with manual settings, 334x9 With core voltage 1.15 it ran orthos all night so its stable, but once again EIST and C1E are not working. Its not dropping the multiplier

How can i make Vcore lower then lowest? cause the lowest i can get is 1.15 in CPUZ

I did mean to say Wolfdale


And thats just a joke about 10k hard drives hehe