what's your proc gonna be Matt?Originally Posted by fireice2
joining you guys soon... once i get my board and a new processor.
wish the Penryns would be available where were at...
well here's my 24/7 clocks... any comments would be appreciated...
DFI™ LanParty UT P35-T2R (12/24 Bios)
Intel™ Core2Duo E6850 with Thermalright™ Ultra-120 Extreme
Team Xtreem™ DDR2-9600 2x1GB with Thermalright™ HR-07
XFX™ NVidia™ 8800GTX with Thermalright™ HR-03 Plus & HR-11
Creative™ Sound Blaster X-Fi™ XtremeGamer Fatal1ty Pro
Western Digital™ Raptor 74GB & Seagate™ Barracuda 500GB SATA
Silverstone™ DA750
Code:>CPU Feature: Thermal Management Control.......... - Disabled PPM(EIST) Mode...................... - Disabled Limit CPUID MaxVal.................. - Disabled CIE Function........................ - Disabled Execute Disable Bit................. - Enabled Virtualization Technology........... - Enabled Core Multi-Processing............... - Enabled >DRAM Timing: Enhance Data transmitting........... - Fast Enhance Addressing.................. - Fast T2 Dispatch......................... - Disabled >Clock Setting Fine Delay Press Enter: Ch1 Clock Crossing Setting......... - Auto DIMM1 Clock Fine Delay............. - Current[245ps] DIMM2 Clock Fine Delay............. - Current[645ps] Ch1 ControlFine Delay.............. - Current[957ps] Ch1 ControlFine Delay.............. - Current[712ps] Ch2 Clock Crossing Setting......... - Auto DIMM3 Clock Fine Delay............. - Current[245ps] DIMM4 Clock Fine Delay............. - Current[712ps] Ch2 ControlFine Delay.............. - Current[957ps] Ch2 ControlFine Delay.............. - Current[645ps] Ch1 Ch2 Common Clock Setting....... - Auto Ch1 RDCAS GNT-Chip Delay........... - Auto Ch1 WRCAS GNT-Chip Delay........... - Auto Ch1 Command To CS Delay............ - Auto Ch2 RDCAS GNT-Chip Delay........... - Auto Ch2 WRCAS GNT-Chip Delay........... - Auto Ch2 Command To CS Delay............ - Auto CAS Latency Time (tCL).............. - 5 RAS# to CAS# Delay (tRCD)........... - 5 RAS# Precharge (tRP)................ - 4 Precharge Delay (tRAS).............. - 8 All Precharge to Act................ - 4 REF to ACT Delay (tRFC)............. - 26 Performance Level................... - 6 >Read delay phase adjust Press Enter: Channel 1 Phase 0 Pull-In.......... - Enabled Channel 1 Phase 1 Pull-In.......... - Enabled Channel 1 Phase 2 Pull-In.......... - Enabled Channel 1 Phase 3 Pull-In.......... - Enabled Channel 1 Phase 4 Pull-In.......... - Enabled Channel 2 Phase 0 Pull-In.......... - Enabled Channel 2 Phase 1 Pull-In.......... - Auto Channel 2 Phase 2 Pull-In.......... - Enabled Channel 2 Phase 3 Pull-In.......... - Enabled Channel 2 Phase 4 Pull-In.......... - Enabled MCH ODT Latency..................... - 1 Write to PRE Delay (tWR)............ - 10 Rank Write to Read (tWTR)........... - 10 ACT to ACT Delay (tRRD)............. - 3 Read to Write Delay (tRDWR)......... - 8 Ranks Write to Write (tWRWR)........ - Auto Ranks Read to Read (tRDRD).......... - Auto Ranks Write to Read (tWRRD)......... - Auto Read CAS# Precharge (tRTP).......... - 3 ALL PRE to Refresh.................. - 4 >Voltage Settings: CPU VID Control..................... - 1.37500v CPU VID Special Add................. - Auto DRAM Voltage Control................ - 2.19v SB 1.05V Voltage.................... - 1.070v SB Core/CPU PLL Voltage............. - 1.55v NB Core Voltage..................... - 1.41v CPU VTT Voltage..................... - 1.30v Vcore Droop Control................. - Disabled Clockgen Voltage Control............ - 3.45v GTL+ Buffers Strength............... - Strong Host Slew Rate...................... - Weak GTL REF Voltage Control............. - Disabled CPU GTL1/3 REF Volt................. - 95 CPU GTL 0/2 REF Volt................ - 93 North Bridge GTL REF Volt........... - 95 Genie BIOS Settings: Exist Setup Shutdown................ - Mode 2 Shutdown after AC loss.............. - Disabled O.C. Retry fail counter............. - 0 CLOCK VC0 divider................... - Auto CPU Clock Ratio Unlock.............. - Enabled CPU Clock Ratio..................... - 9 Target CPU Clock.................... - 3780MHz CPU Clock........................... - 420 Boot Up Clock....................... - Auto DRAM Speed.......................... - 266/800 Target DRAM Speed................... - 1260MHz PCIE Clock.......................... - 110mhz PCIE Slot Config.................... - 1x 1x CPU Spread Spectrum................. - Disabled PCIE Spread Spectrum................ - Disabled SATA Spread Spectrum................ - Disabled
Reply With Quote
Bookmarks