QX9650 & IP35 Pro, Sub Zero

[Deanzo]

Thanks guys

, CPUz is reading the vcore right.

DDR2 and this beta bios is really holding me back for now (hehe kind of ), I've been told a new beta should be out soon. It would be really nice to change little things like ram timings off spd with out having to reset the cmos to get the board to post again.
Or not having to post and boot into windoz @ the speed you want to bench at, as uGuru all most all was reboots you if you change something, and don't even think about changing the vcore with uGuru or you will be very sorry.

But other than that (and it is a beta bios) the board has done great.
If the new bios fixes the issues that I'm having, I'm sure I can pull off 6Ghz.

For now with the above issues in mind, 5.95Ghz on two core is the best I can do.

[disruptfam]

awesome!!!

[Timbosan]

nice clocks and scores, thats an awesome cpu. Also nice clocks on the un-modded ultra most do 1000+ on DICE or LN2 with mods. You'll have the 300k AQm & 100K 01 easy. good work

[lukas69]

Amazing CPU is real 6 Ghz possible

[Deanzo]

A wee update.

I've added another PSU (OP750) and changed the CPU pot to a F1 EE.
Though I still haven't got round to modding the card.

3D01 = 101891

http://service.futuremark.com/compare?2k1=9320375

3D03 = 61039



3D05 = 30017

http://service.futuremark.com/compare?3dm05=3916354

3D06 = 20105

http://service.futuremark.com/compare?3dm06=4757252

AM3 = 317984





SPI 1M = 7.859



SPI 32M = 8m 43s 469ms



PI Fast = 16.08s



CPU-Z = 6000mhz

http://valid.x86-secret.com/show_oc.php?id=299163

Geekbench = 9342

http://browse.geekbench.ca/geekbench2/view/33517

[szukalski]

Mate, I am loving your work. That's great stuff you're doing there. #OCNZ!!!

[Nosfer@tu]

I belive you saw a GREAT difference betwean the mass of a K!ngP!n pot and LD

[M.Beier]

Holy crap thats a high frequency... With the right board, and a good pair of DDR3 + some tweaking, thats 7.5s SPI, VERY impressive...

Im not much into 3D, though I have to (Oups, nothing in this sentence )
Your nature in 01SE, is that with or without LOD tweak?

[Oliver]

Looks good, did you use the same vcore with ld pot and f1 ee while benching am3?.

Thanks in advance.

Keep pushing it.

[Deanzo]

I belive you saw a GREAT difference betwean the mass of a K!ngP!n pot and LD

As much as I really like my LD pot, it was never designed for quads at silly clocks and vcore.
Where as the F1 EE eats it up and asks for more, Vince has made a spectacular container.
Here's a wee vid I took of the F1 EE & Tek9 in action.
http://www.youtube.com/watch?v=i6oh5L_pABA

Holy crap thats a high frequency... With the right board, and a good pair of DDR3 + some tweaking, thats 7.5s SPI, VERY impressive...

Im not much into 3D, though I have to (Oups, nothing in this sentence )
Your nature in 01SE, is that with or without LOD tweak?

I'm working on a deal for a new board and DDR3 as we speak

Yes, that was with LOD.

Looks good, did you use the same vcore with ld pot and f1 ee while benching am3?.

Thanks in advance.

Keep pushing it.

No, not the same, as the new run is 235Mhz faster.
I couldn't control the load at anything near that speed with the other pot.
Thats not saying anything bad abot LD's pot, it's just not comparing apples to apples.

[n3wbi3]

wow 6ghz

wat vcore?

[M.Beier]

Sounds great...

I dont think the pot matters as much as you point, basicly, the thing with more mass is keeping cold / maintain temperature for a longer period of time, during 1M, AM3 & PiFast you shouldnt be able to notice any difference caused by mass... However, at the 32M, the difference will appear, I think its caused by the voltage...

Okay... Seems like hitting 100K 01SE with daily setup isnt going to happen with single GFX as I hoped for
... Or perhaps with some tweaks, however, really gonna require som serious luck :\

Still very impressed by the frequency, its simply INSANE....

[k|ngp|n]

Your sick!!

[Oliver]

Thanks for the information...

[dinos22]

wow Deanzo you really make it hard for us over here don't ya

thank God i got one of these sweet ass F1 EE pots on the way
now just a chip with high enough FSB and you're going down
can't have little cousins beating big cousins now can we

great work just kidding around

[M3kk]

Nice score, nice cpu , but why dont run the Spi1M with the settings what you used for PI Fast ?: D

[Deanzo]

Sounds great...

I dont think the pot matters as much as you point, basicly, the thing with more mass is keeping cold / maintain temperature for a longer period of time, during 1M, AM3 & PiFast you shouldnt be able to notice any difference caused by mass... However, at the 32M, the difference will appear, I think its caused by the voltage...

All I can say it's made a big difference for me, I'd say your right about the voltage, after 5.6 / 5.7Ghz I really need to start pushing them up and the swing I was getting was way to hard to control.
I have a number of issues to work around with this setup (as we all do) something to do with this chip on this board, the beta bios and uGuru, just doesn't work right (never had these issues before this chip and bios) as you would know, to clock up in windoz I can only use uGuru and the thing is, 50% of the time it wont start or it just locks up. If you use CPU-Z with it, it locks up your PC 100% of the time and when it will work on its own I can only clock up 100Mhz at best. So I try and boot at the speed I want to run at, and the new pot as made that very easy.

Your sick!!

Thanks mate

wow Deanzo you really make it hard for us over here don't ya

thank God i got one of these sweet ass F1 EE pots on the way
now just a chip with high enough FSB and you're going down
can't have little cousins beating big cousins now can we

great work just kidding around

Hehe, Just wait till I get my new board and ram

You'll really like the pot mate. if you can't tell, I'm very happy with mine

Nice score, nice cpu , but why dont run the Spi1M with the settings what you used for PI Fast ?: D

Time frame for one, I'd set out a plan on the order of the benchmarks I wanted to run and how much time/Ln2 each would get.
PIFast was the last 2D benchmark to be done and I was still working out what setting were the best at those clock speeds.
Both my SPI times need alot of work imo, but theres all ways a next time.

[illidan]

6G awsome!
and 5.9 sp1... great results

[DagoDuck]

GREAT! You are very well equipped so you must simply achieve good results!

[Xevipiu]

QX9650 on LN2 and 8800 Ultra on Air.

There has been alot said about where these new chips cold bug, well I'm happy to say at low clock speeds I bug out at -173!! Yes you read that right. Though, at high clock speeds it gets very, very unstable at -144.
-125 to -135 seems to be where the chip works the best.

510 Max FSB

Fsbwall with Spi?

my 9650 500fsb x10 -23º SS with IP35Pro (Bios16)

1m 500x10


2m 499x10


Thanks

[M.Beier]

You might be right, just me not giving much for 2-5 deg

GREAT! You are very well equipped so you must simply achieve good results!

Hey dude, keep those bedroom comments on the PM

[Leora]

Deanzo, wow... some excellent results there...

[andre X_X]

Excellent bench m8...

[DagoDuck]

Hey dude, keep those bedroom comments on the PM

I would not like to know, what you understand by this posting.