Hi to all!
I'm a new owner of this mobo and i have some problems; First of all my sistem:
- Intel Q6600 step G0
- 4x1 Gb Crucial Ballistix Tracer PC8500
- 1 hd seagate 250 Gb SATA
- Ati x550
- WIN XP with SP2
THE PROBLEMS:
- The "fake boot": I've installed the last official bios and at default the sistem see my rams like CRUCIAL PC6400 with these settings "266/800" and with the voltage "1,904" and all other options are setted to "AUTO".....i use an APC 800VA and everytime i'v finished to use pc i turn off the power button of apc...After this when i went to turn on the pc ,fisrt i turn on the APC,then i turn on the pc,but....the first time the pc starts and after 2-3 seconds it turn off automatically and after 2-3 seconds it re-starts and it loads all the OS normally...have you got any ideas???
- The Crucials: i try to put them (4 sticks of 1 Gb) at default as Crucial sais:2,2 Volts and "266/1066"and the other settings setted on "AUTO" but the instability rules.....so i had the suspect of memory broke and with the memtest 1,70 (with the ddr2 at 2,2v/1066) ALL of 4 sticks (try one by one on the first yellow slot) had many errors...but is it possible that 4 modules with a week of life were all corrupted?
Or i must setted very well "clock fine delay" and "read delay phases"?...must i set the correct timings manually in the bios if i want to use them as DDR2 PC8500?...if you know..tell me al the bios settings.. to work with 4 gb of crucials and a q6600 all at default.......Last thing : The pc seems to be stable only with the crucial at 800 MHZ....with the crucial at 1066 IE crash and the in some cases the pc (from windows9 reboot automatically...
- in your dfi the standby led doen't turn off in every cases?
now bye and thx for all...
Reply With Quote
Bookmarks