Quote Originally Posted by jonspd View Post
New bios out KTE


with A7376AMS.P0F

Quote:
1.Modify "Adjust AM2+ CPU Ratio" function to user friendly. 1.Modify "Adjust AM2 + CPU ratio function to user friendly.
2.Modify "DCT Unganged Mode" default to "Auto". 2.Modify "DCT Unganged fashion" default to "auto".
3.Fixed "Adjusted CPU Frequency" display incorrent when use AM2+ CPU. 3.Fixed "Adjusted CPU frequency display incorrent when use AM2 + CPU.
4.Added "Patch AMD TLB Error" item. 4.Added "patch AMD TLB Error" item.
5.Fixed can't adjust to x6 and x7 ratio when use AM2 CPU. 5.Fixed can not adjust to x6 and x7 use ratio when AM2 CPU.
6.Modify "Current DRAM Frequency" and "FSB/Memory Ratio" function code. 6.Modify "Current DRAM Frequency" and "FSB / Memory ratio function code.
7.Modify display memory channel function at POST when use AM2+ CPU. 7.Modify display memory channel function at POST use when AM2 + CPU.
A heads up to anyone that decides to try the new beta bios A7376AMS.P0F, it auto set the ram to 1066mhz and i have 800mhz ram. I thought it was a bad flash untill i took one stick out and it did boot. It also would not save any settings. I tried setting the ram manually to 800mhz but it would then not reboot without a cmos reset. I finally got it working again by booting to usb and flashing back to the 1.13 bios. On the bright side their were some good new options, it allows you to enable or disable the tlb patch and change the multiplier without messing with p-states. Hopefully they will get the bugs worked out and release a similar official release.