Quote Originally Posted by Seanie's Show View Post
Glad someone mentioned it, I havent had to reset the bios to get it to post again, but I am getting random stability, dont understand it, one day it will run prime for 16 hrs, the next 16 mins before failing/BSOD ???? , and this is all with absolutly nothing in the bios changed at all.

My current settings are

CPU Q6600 = 3.6ghz (400x9) 266/667 strap GTL's = 100/100/115
Mem = 1000mhz 5-5-5-15
Voltages etc, in the screenie below
My board & Q6600 is solid the only time it fails to boot is when I messed something up & 1/2 the time just powering the PSU down & up again so the board does a full double strap setting boot sorts it out anyway. This is honestly the best board I have ever had.

This is just a suggestion & can’t hurt to try but imo your manually set GTL's are a bit out of the norm.

For the Q6600 I would try a couple of things firstly maybe a little more VTT voltage (my q6600 loves vtt) plus adjust GTL's between 0.67/0.70 or try a few points either way of Praz's cheet sheets from his edgeofstability dot com site or secondly try running with GTL's disabled/auto (you may need to set the GTL+ Buffer to week to run GTL's disabled)

CN