Hi guys,
I'm new at Intel's club but not at DFI's (good old nf4..)
Set up new rig as in my sig n trying to squeeze a bit fm it.
Right now i'm stuck at relatively low fsb n hope you gonna help me:
CPU load temp is 50C (CoreTemp)Code:-> Voltage Settings CPU VID Control: 1.40000V CPU VID Special Add: Auto DRAM Voltage Control: 2.150V SB 1.05V Voltage: 1.070V SB Core/CPU PLL Voltage: 1.55V NB Core Voltage: 1.50V CPU VTT Voltage: 1.50V Vcore Droop Control: Disabled Clockgen Voltage Control: 3.45v GTL+ Buffers Strength: Strong Host Slew Rate: Weak GTL REF Voltage Control: Enable CPU GTL 1/3 REF Volt: 102 CPU GTL 0/2 REF Volt: 102 North Bridge GTL REF Volt: 102 Exist Setup Shutdown: Mode 2 CLOCK VC0 divider: AUTO CPU Clock Ratio: x8 - Target CPU Clock: 3360 MHz CPU Clock: 420 MHz Boot Up Clock: Auto DRAM Speed: 333/667 - Target DRAM Speed: DDR2 841 PCIE Clock: 100 MHz PCIE Slot Config: 1x 1x
DRAM Timings all on AUTO yet, resulting in 5-5-5-15
Any help to push it more? I would like to hit fsb 450MHz.
Thanks
Reply With Quote
Bookmarks