-
I just emaild the guys up at SpeedFan to see if i can get a little more insight into configuring SpeedFan to read the NorthBridge thermal diode with the Maximus SE.
Does anyone know if the NorthBridge's input is on the (W83627DHG WINBOND) chip or the (ADT7475 Thermal Monitor and Multiple PWM Fan Controller) chip???
I know the CPU and System temps come through WINBOND, but i think thats it. so im not sure ware the NB is.
Last edited by Exahertz; 01-09-2008 at 10:08 PM.
Current System Build
Designaton:
" Rad Hat "
__________________
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB - Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup) - Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W - Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!! - (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks